ok ive got about 2 more months to finish my jon boat, i have started sanding where i want to paint, and its talking a longgg time, so any help there would be great, i also am wondering which paint/ primer, and carpet, and carpet glue. and what should i do to completly re-do my trailer's electrical system. thanks

teenage angler

Surface prep for aluminum

80-100 grit: It gives better tooth and paint adhesion.  Sanding must be taken into the best previously adhered surface in order to have the new coat of paint hold properly. Start with an orbital sander; finish by hand.

Clean the aluminum surface to remove all dirt, old paint and oxide from the surface. Apply a coat of acid etch primer following the mixing and application instructions to the letter. Within 24 hours of applying the etch primer, apply the topcoat finish. This will be an automotive grade or marine grade polyurethane coating. Use a good quality product to protect all the prep time and elbow grease you invested prior to the topcoat application.

A wash primer which you can purchase from industrial paint stores, such as Sherwin-Williams. You are unlikely to find such a product at a hardware store.

thanks catt, anybody know whats best for carpet and carpet glue?