Jump to content
A-Jay

Seat Post Deck Plugs ~

Recommended Posts

Been looking at these for a while.

Wanted a way to keep water & debris from going down into the seat post (and non-optional ski-post) 'holes' in the Pro-V Bass deck.

Had to be durable, fit snuggly but also be removable.

Settled on Bob's Machine Shop's Deck Plugs .

CNC aircraft-grade aluminum, has watertight system and an O-ring seal, which keeps water out of your dry boxes.

Available in two sizes, offered with Powder-coated or brushed aluminum, to ensure long-lasting performance that provide a safe-and-simple solution to the hole left by your pedestal when it is not in use. 

Available at the web site as well as a few other quality vendors (TW).

I'd recommend them. 

:smiley:

A-Jay

https://bobsmachine.com/product/deckplugs-pedestal-seat-plug-0-75-inch-hole/

 

2015595028_Deckplug1.thumb.jpg.c656b0cbadcaaac93b3a9efd45a09f94.jpg405567820_deckplug22mb.thumb.jpg.d1840f01c18285e34b33e7396436d659.jpg

  • Like 2
  • Thanks 1

Share this post


Link to post
Share on other sites

I like those!  Very clean, and not super expensive.

  • Like 1

Share this post


Link to post
Share on other sites
14 minutes ago, J Francho said:

I like those!  Very clean, and not super expensive.

Clearly haven't been on the water with them but my experience says -

'Yea - these are going to be perfect'. 

They have colors but I think 'stepping' on them all day may wear off the paint eventually. 

It's a little thing but we know that's where the Madness Lies . . .

:smiley:

A-Jay

Share this post


Link to post
Share on other sites

great find brother 👍

  • Like 1

Share this post


Link to post
Share on other sites

How far up do they sit?  What I mean is, are they level with the base itself or do they sit above it and pose a tripping hazard?

  • Like 1

Share this post


Link to post
Share on other sites

I can’t seem to find if they have em in other diameters, my Smokercraft has larger posts and I’d love the same setup for my front deck. 

I suppose I could just jam some play dough in there 🤔😄

Share this post


Link to post
Share on other sites
1 hour ago, gimruis said:

How far up do they sit?  What I mean is, are they level with the base itself or do they sit above it and pose a tripping hazard?

Good Question ~ 

 And something I was concerned with as it doesn't take much to get me up-ended. 

 It may depend on how a seat post is designed.  My rig has a small 'insert' that sits about an 1/8 inch above the deck.

These plugs sit 'flush' with that but is about another 1/16 of an inch above that.

So although it will be a while before I get to float around, I do not expect it will take too long to acclimate to the additional 3/16 of an inch.  

:smiley:

A-Jay

18 minutes ago, Way north bass guy said:

I can’t seem to find if they have em in other diameters, my Smokercraft has larger posts and I’d love the same setup for my front deck. 

I suppose I could just jam some play dough in there 🤔😄

The two sizes I've seen available are 0.75 and 1.77 inch. 

https://bobsmachine.com/product-category/deckplugs-decksavers-cnc-machined-deck-accessories/

:smiley:

A-Jay

Share this post


Link to post
Share on other sites

How do you remove them?

Tom

Share this post


Link to post
Share on other sites
32 minutes ago, WRB said:

How do you remove them?

Tom

While I can not ever see these plugs 'coming out' on their own (falling out essentially),

they are easily lifted up & out of the wholes with most any small, flat, square ended implement.

A small screwdriver works for me. 

:smiley:

A-Jay

 

Share this post


Link to post
Share on other sites

Yeah, great product.  I've got 4 of the carbon fiber ones in my boat, they are sharp looking!

 

My only problem was that the carbon fiber ones were $35 each....  :mad1:

Share this post


Link to post
Share on other sites
17 hours ago, A-Jay said:

While I can not ever see these plugs 'coming out' on their own (falling out essentially),

they are easily lifted up & out of the wholes with most any small, flat, square ended implement.

A small screwdriver works for me. 

:smiley:

A-Jay

 

So you pry them out by using a screw driver blade. Don't know the type of lubricant used for the O-ring but it may take a set and be difficult to pry up after a few months. Might think about using a shoe lace tied under the collar for a lanyard if needed.

Tom

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • fishing forum

    fishing

    fishing rods

    fishing reels

    fishing forum

    fishing

    bass fish

    fish for bass
    fish

×