I'm trying to add a gps to the boat, took off the fuse panel cover but can't get the panel itself off the mount. Any suggestions?

Thanks,

Dominic

First .... what boat do you have ?  And second, why are you removing the fuse panel??

I have a 461VS. I want to run the wires for the gps to the fuse block rather than directly to the battery, so the main power breaker will shut it down with all the rest of the accessories.

That being said, I just noticed in the book there is a pin adapter feeding the back of the fuse block. This might put a kink in my plans. :-/ Does anyone know where I should connect the power supply to have it shut down with the main breaker.

Thanks,

Dominic

If you haven't already found this, there should be a blue wire under the console that you can tap power from. Another good spot is the hot lead running to your horn switch ..... you can pick up a ground anywhere. If there is a terminal block under there, look for the section that has the blue wires and you can connect to that section.

Thanks for the reply. I found a terminal strip designated for electronics. I've used this before, just wasn't thinking yesterday.