Are you supposed to oil through that tiny hole or does it come apart?

 

I've tried to open up similar type reel handles to oil and ended up ruining the handle, so I don't want to experiment.

Pop off the chrome plastic trim piece and there will be a screw in the middle. There is no bearing in there, just a plastic bushing that is what is in my Fuego. Remove the screw and pull the knob off. There is a thin washer at the bottom of the handle shaft. I just clean everything, apply a thin coat of oil the shaft of the handle & re-assemble. 

29 minutes ago, swhit140 said:

Pop off the chrome plastic trim piece and there will be a screw in the middle. There is no bearing in there, just a plastic bushing that is what is in my Fuego. Remove the screw and pull the knob off. There is a thin washer at the bottom of the handle shaft. I just clean everything, apply a thin coat of oil the shaft of the handle & re-assemble. 

 

Thanks! The chrome piece popped off easily, that was the main thing I was concerned about. There's no screw on the Revros, so I don't know if it just snaps on or what, but it doesn't matter, I can oil it with the chrome piece off, and that's all I need.