Edge Cts Evolution For Gmc
#16
Posted April 25 2012 - 04:05 PM
this info is regarding gas engines, diesel engines are another story, and i dont know much about them, except for store bought programmers will have amazing results. gas engines however never have amazing results with a store bought programmer
#17
Posted April 25 2012 - 04:06 PM
It chirps now all the way up in third now as it is. This program is basically a computerized shift kit. BTW, it's dad's truck. He might be a little upset if I roast his tires....
#18
Posted April 25 2012 - 04:14 PM
#19
Posted April 25 2012 - 04:17 PM
Not sure what the question is.... If you step on it, tires chirp as it goes through the 1st three gears. It's an Alison 6-speed auto, so it runs 1st to 3rd pretty quick.
6 speed yes , Alison no.
I think the Alison's were Diesel only The other 6 speeds like mine were not made by Alison.
#20
Posted April 25 2012 - 04:36 PM
the comments dealers make I don't buy into a whole lot I'm sure if something major went and there was a big bill they might play that card but when i worked for Nissan we had countless modded 350z's and titans and so forth come in for normal wear and tear stuff some even got service bulletin warranty repairs when technically there were more after market parts then Nissan or Nismo parts but they still got there repairs and i got to test drive them
- SMB 6.1
#21
Posted April 26 2012 - 12:11 AM
I was thinking the same thing, Allison's were for the diesels that were capable of pulling the earth!6 speed yes , Alison no.
I think the Alison's were Diesel only The other 6 speeds like mine were not made by Alison.
#22
Posted April 26 2012 - 08:25 AM
Anyway, I installed the "Extreme Program" last night. It's not as dramatic as I thought it would be at first, but after driving around town I started to see many changes. Holds a lower gear while cornering, real quick downshifts, even got a good hookup on a 0-60 time of 7.4 seconds with a full tank of gas. I'll be towing my boat 80 miles or so to Oneida Lake this weekend for a Take a Soldier Fishing event, so I'll be able to get some mileage data to report back as well.
Hi Salenity, I was told the same thing by the techs at the dealer. When I pushed them and explained that that wasn't legal, they said that was just what they were told to say. I don't doubt that GM is using versions in their chips, but I have my doubts about the techs' ability to get it. I have to check to make sure they put the oil cap on after an oil change. Seriously.
AFoster, this programmer actually allows you full customization of dozens of parameters. I just went with the preloaded programs since I was just getting started, and don't really know enough yet to build my own. It's definitely safer than DL'ing something from the internet. I've seen what can happen when things go wrong. The unit also displays and resets trouble codes, has several monitors built in, but can be expanded to include many other sensors. There's built in performance tests, and even a cool little "mileage coach" gauge that basically helps you learn to modulate the throttle gently for better fuel econ. I noticed when I was in "cruise around town" mode, I was doing pretty well, which explains the better fuel econ I see than others report.
It's literally a 5 minute installation. 10 if you want to make it pretty. So, for someone not mechanically inclined, there's no reason not to look into one. Oh, did I mention you can get a back up camera for it? Yeah, I think I'll be adding that to mine.
Everything in moderation.
Please read the Forum FAQs
Join us:

Become a member for FREE!
Subscribe To Our Newsletter
Note that you can report content and alert moderators by pressing the "
Report" button when viewing the content.
#23
Posted April 27 2012 - 10:16 AM
6 speed yes , Alison no.
I think the Alison's were Diesel only The other 6 speeds like mine were not made by Alison.
The aliison was available in the 3/4 and 1 ton with the 8L gas burner.
#24
Posted April 30 2012 - 09:01 AM
Everything in moderation.
Please read the Forum FAQs
Join us:

Become a member for FREE!
Subscribe To Our Newsletter
Note that you can report content and alert moderators by pressing the "
Report" button when viewing the content.
#25
Posted April 30 2012 - 09:50 AM
- SMB 6.1
#26
Posted April 30 2012 - 09:55 AM
Everything in moderation.
Please read the Forum FAQs
Join us:

Become a member for FREE!
Subscribe To Our Newsletter
Note that you can report content and alert moderators by pressing the "
Report" button when viewing the content.
#27
Posted April 30 2012 - 10:03 AM
- SMB 6.1
#28
Posted May 02 2012 - 09:29 AM
Everything in moderation.
Please read the Forum FAQs
Join us:

Become a member for FREE!
Subscribe To Our Newsletter
Note that you can report content and alert moderators by pressing the "
Report" button when viewing the content.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users




























