Skip to content

nimbus2065

Members
  • Joined

  • Last visited

Everything posted by nimbus2065

  1. The drain would probablybe a good idea the problemI found with mine is havin only 1 pole I spin.
  2. Awesome setup. What kind of blue tooth speaker is that? Go with the seat riser I had a pedestal seat mounted and didn't like it when my brother went out with me
  3. Its not as bad as you'd think. I usually only use it in 3' or less anything more yes it does bend but other then that its good I have a metal ring wrapped in electrical tape around it tied to the para cord seems to help with the flex as it floats up and down it.
  4. Mod's I made to my 8' Sun Dolphin. Has made it much more enjoyable to fish out of.
  5. The 3x is an awesome unit I've seen them on clearance at Walmart for as low as $99 I only went with the 4 cause I got It for $200 off lowrance factory site with the 83/200 - 455/800 transducer because the chirp was coming out
  6. I'm running a Lowrance Elite 4 HDI has GPS navionics software. Wish it had side scan but I can't afford the best of both worlds so. It's compact to.
  7. I'm running a Lowrance Elite 4 HDI has GPS navionics software. Wish it had side scan but I can't afford the best of both worlds so. It's compact to.
  8. Was real easy to drill through I was worried at first also. I thought the plastic was a lot thicker than it is.
  9. It's a pretty sweet setup I have a 8ft so limited on space I came up with side tackle storage. How stable is it while up on the deck?
  10. Here's a pic of the plugs for you $3.50 at Walmart and some marine sealant
  11. I put drain plugs in the rear of my hull so I don't have to tip it on end anymore. They work perfect.
  12. That's pretty sweet. Is there storage under your casting deck?
  13. Why do you carpet the trailer boards?
  14. heating the plastic before adhering the decal helps them stick better
  15. I used kayak drain plugs got them at Walmart for 3.50 a piece. Used 5200 to seal them they work perfect. Inside I have a small electric bilge wired up on a switch bone dry in 2 minutes
  16. Comes in from the seams I'm thinking. May also be getting thru some of my add on I screwed in gonna resilicon everything and hope I don't need to use them to often. I've also had the boat for 2 years and never drained it so maybe some got in from snow over the winter.
  17. Just installed these drain plugs tired of stripping my boat to drain, What do you guys think?
  18. Yeah I have a Sportsman. I found these plugs for kayaks I think will work with some 5200 and a few screws
  19. Yeah I have a Sportsman. I found these plugs for kayaks I think will work with some 5200 and a few screws
  20. Pointhunter the drain you installed is in the floor? How to you empty between hull water? I have a small rubber plug above my Bow rub rail. I want to install a thru hull in the bottom of one of my pontoons.
  21. Has anyone installed a drain plug in the rear of there hull? Real pain taking all my mods off so I can tip it on end.
  22. Cool thanks for the reply I will try that this things a bear decked out and I'm not getting younger lol
  23. I have a flat trailer no tilt any advice for getting the boat back on the trailer on steep ramps

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.