Bassman33

HI I JUST USED DOWELS FASTENED WITH 4X 8-32 BOLTS ON CORNERS.DRILLED HOLES PART WAY THRU 5/8 CABINET GRADE PLYWOOD INTO DOWELS 1" I THINK WITH THEM IN BOAT TOOK OUT AND FINISHED DRILLING THRU AND THEN FASTENED POST WITH 4X 1/4-20 BOLTS. PUT RUBBER CAPS ON DOWEL ENDS MAKES SNUG FIT.

HI HAD SAME PROBLEM ON FRONT ENDED UP SCRIBING AROUND PADS WHEN MOTOR WAS IN PLACE TOOK OFF MOTOR AND IN CENTER PUT SHEET METAL SCREW AND 1/2 WASHER.WHEN CLAMPING MOTOR BACK IN PLACE THE SHAFT OF CLAMP HITS TOP OF SCREW FIRST GRIND SOME OF CLAMP END INSIDE OF CUP. DID IT ON BOTH FRONT AND REAR OF MY 10E AND AFTER HITTING SOMETHING MOTOR SURELY WOULD HAVE POPPED OFF IF NOT DONE.

HI TRY THIS MADE FROM PLYWOOD, DOWELS AND POST WORKS GREAT HELD UP ALL SUMMER SO FAR