Tyler.lee44

Yes sir do you think it will be any more then 2000 I found the same motor for 2000 ready to go with all cylinders at 110? What is the better decision

I bought the motor cause my boat came with one that I had no clue had a cylinder looking compression in it(I was young). The motor blew up about 2 moths later and I found this one for a steal. My dad passed away in 2015 at 39 with a heat attack we fished 24/7 and I miss it so I was just trying my best to get back out on the water. My boat is rated for a 140 so I didn’t over do it. I do have a good question though how much do you think it’ll take to fix my boat

I found out the problem with the boat after trying a lot of things y’all said. I had my compression tested 100 on all cylinders but one it had 75 so bad motor. 2ns time replacing it I guess I’m buying bad motors ran out of money to keep buying motors so looks like it will be a while before I get another boat thank y’all for the help?

I understand the 21p was not gonna help the stress but after cleaning carbs and a couple small gas leaks the motor ran a lot better with ears hooked to it. So I changed the 18p to the 21p because I knew it needed it. My boat runs amazing out of the water. But once you put it in the water and try to plane it off it acts like the prop is ways to big just will not get out of the whole. I do see that one of my plugs had a misfire due to the black residue around the plug I’m not sure if that could be cause a problem or not Another thing that may not be helping is I did almost sink the boat a while back before the motor started acting up. My hull got full of water due to a airiator hose busting and water was flowing in the boat without my knowledge. The boat just about sank in 20 min. I made it back to the launch let it drain fixed the problem and took it back out. It ran fine after that but not long after this happened this problem came about so maybe the foam is full of water and making it have trouble getting out of plane. But it would make no since because the boat does not sit low in the water it sits about normal

Hey guys I have a 90’s model 135 mariner on a 16’ stratos. I can not get my boat to plane for nothing. I’m at a 21p was at a 18. I have cleaned the carbs check my reed valve. My motor runs like a top but when I try to plane off it bogs. Motor is trimmed down all the way and I am full throttle. There was a couple of times where I got it on a plane from a friend of my jumping on the bow repeatedly. Any help is appreciated.