PH411TX

US Army 1/67 - 12/69 Vietnam Vet Ft. Dix, NJ Ft. Monmouth, NJ Ft. Ben Harrison, IN Bien Hoa, RVN Long Binh, RVN Ft. Lewis, WA

I found the solution in case anyone else has run into this. I did not mention that the Force Trolling Motor has a transducer built-in. That transducer was plugged into the 106SV and the transom mount transducer was plugged into the 93SV at the console. I had an old Plus 93SV which I mounted at the bow, but did NOT network. I DID attach the transducer from the Force to the Plus unit (again, not on the network) and there are no problems.

Happy New Year Jersey i grew up in central Jersey and got into fly fishing. Caught a lot of bass on the North Branch (Raritan) and trout in the gorge (Califon). Hope you enjoy it as much as I did

Problem: The 93SV at the console either shuts itself off, reboots, or locks when I press any presets (preset 1 is navigation, preset 2 is 2D and ClearVu). Configuration: UHD 93SV at console (flush mount) Ultra 106SV at bow Livescope GLS10 All three of these units are supplied with 10AWG marine wiring through an “intelligent” fuse panel Attempted Solutions: 1. Replaced network cable – no fix 2. Replaced 93SV with an old Plus 93SV – problem did not occur. 3. Garmin sent remanufactured UHD 93SV – problem recurred 4. Replaced 93SV cradle – no fix Notes: Problem does not manifest if the units are NOT networked. Problem does not seem to be heat – happens even on cold days no air restriction under console.