Looking at building a deck for my Jon Boat. Where can I find "marine plywood" or whatever wood is recomended for this type of construction?

Thanks,

Jeff

Ihave never seen it at lowe, home depot but i looked on the internet and its about 110.00 for a 1/2 inch sheet,  140.00 a sheet for 5/8 sheets are 4x8

you can use regualr plywood

what i did was use regular plywood then i put topson water seal on it then i coated it wirh fiber glass resign and it is holding up real good had same wood on there for 2 years now and no problem

cut and drill all your holes first though

CDX plywood coated with a couple coats of fiberglass resin, as robe said, would work just fine... keeps all the water out.  It is also ALOT cheaper.

Check out a local independent lumber yard. Ask them about AC, or BC plywood, this is a lot  stronger , lighter and will lie flatter than CDX. A little more expensive, yes but not near as pricey as marine grade. A cabinet  makers supply  house is another good source.  Good luck with your project.