Anybody know anything about a Lowrance 102C? I need to replace my non functioning depth finder on my boat. Right now I have a Lowrance LMS 332 on the front and a dead unit on the dash. I would like to put the 332 on the dash and get something for the front. I don't need anything real fancy on the front. I found a 102C on ebay. It's a color unit with 480x480 resolution. It has the network port on the back, so I'm thinking I could get the network cable and hook it to the GPS antenna that I already have? Have any of you done this before? I need to do some research, but I thought I'd try to get some input from anybody with any experience with either the 102C or networking two units.

Here is what I'm looking at---> eBay

Try calling lowrance's tech support. They helped me with installing my 102c

The X-102c is not a gps enabled unit.  It will not have gps functionality on it.  You can network it to share digital data like depth and temp, but that is about it.

I just bought the same unit last year. after my 5th time out on the water I lost all sounds from unit. depth,fish,all.... dont nkow what to do!!!

Hey Slowtroller, did you try rewiring that unit. I had a situation with the fuse holder and replaced it.

Thanks for the info guys. After doing a little more research acar555 is spot on...no gps.

Darrin

everything else works fine on the unit. I STILL USED IT,JUST WITHOUT BEING ABLE TO HEAR ANY SOUNDS FROM THE UNIT.AND YES i DID PULL THE FUSE OUT AND PUT IT BACK IN BUT STILL NO SOUNDS... IM GOING TO CALL THE 800 # AND ASK THEM IF THERES A WAY TO RESET THE WHOLE UNIT. THANKS FOR HELPING GUYS!!! MIKE

To do a soft reset of your unit do this.

1.Turn unit OFF

2. Press and hold the PAGES key

3. Press and hold the PWR key

4. Release both buttons when the unit powers upress and hold the PWR key

To restore to full factory defaults do a hard reset

1. Turn unit OFF

2. Press and hold the ZIN & ZOUT Keys at the

3. Press and hold the PWR key

4. Release both buttons when the unit beeps.

everything else works fine on the unit. I STILL USED IT,JUST WITHOUT BEING ABLE TO HEAR ANY SOUNDS FROM THE UNIT.AND YES i DID PULL THE FUSE OUT AND PUT IT BACK IN BUT STILL NO SOUNDS... IM GOING TO CALL THE 800 # AND ASK THEM IF THERES A WAY TO RESET THE WHOLE UNIT. THANKS FOR HELPING GUYS!!! MIKE

Sorry about that, the connector had a problem not the fuse. The sonar would come on but it would not light up