I was given a Jet JDP-14M drill press,

it works but I have to get a chuck for it,

Im not sure on what to get as a complete

package of a chuck? I think its a 5/8

I need but do they come with the arm

that drives it?

I would not know If I bought the correct

fit for this drill press either, so I need help

with this issue and if ya know what I need,

please let me know and forgive my

machine parts illiteracy lol

Im considering Ebay, I can't find a

retailer just yet.

I have pics and as you can see I have

nothing there to keep it clamped unless

I some how use the unit that came off

of it. It has a aluminum plate that clamped

it on and it can be removed to use.

This is what I took off

I would give these people a call, they have a toll free #. They should get you going in the right direction.

http://www.victornet.com/productpages/drillchuck1.html?gclid=CKaWwq7mvZ8CFaM45QodLhgb3A

Your machine has a #2 Morse Taper spindle. This link has the details of your machine.

http://www.midwestwoodworkersonline.com/jet/Page44drill.html

Go to this site: http://www.cdcotools.com/

Click on "All Kinds Of Die Makers Tools"

Click on "Drill Chucks and shanks..."

The forth block shows a list of shanks. Choose #2 MT (you have achoice of five shank sizes)

Go above to the first or second box and choose your drill chuck.

Match the drill chuck taper to the shank taper (look at the taper boxes).

If I were buying, I would choose the 25015 keyless drill chuck (1/32"-1/2" drill) w/ J6 taper, $22.00. I'd match it with a 21325, #2MT shank, J6 taper, #5.00

For $27 bucks + shipping, you're in business.

Edit- There are some sites whereas you can buy the chuck with a #2 MT mated to it, but this is the easy way. There are also many other tools that fit a #2 MT taper, so you are not limited to just a drill chuck. I use CDCO a lot, and for Chinese, it's good servicable stuff.

Thanks guys, this is a big help

I didn't have time today between work and home stuff to look into it, but this info is gonna help