hey guys i have the berkely scale up to 50lbs the black one and i saw that i can put up to ten fish in the memory so i can do a 5 fish best limit. thought that was kool but i got rid of the instructors and cant figure it out can anyone help me ?

Contact Berkley. I have in the past and had good results. Their website is: www.berkley-fishing.com. Phone nr. for customer service is: 800-237-5539.

On the web site if you click on "about us" it will open a contact page with a form to ask questins and get info if you want to go that route.

Shortbasser

would call berkley, as well.

don't buy a lotta their products anymore but, when i did, there was always somebody that would help you on the other end of the line.

T-Rage, here are the Berkley Scale Instructions.  Hope this is what you want.  I had the same problem and got these instructions from Berkley.

                               SeniorBasser

Operating Instructions: Berkley Scale

A. Powering-on the scale

1. Press and hold the POWER button for two seconds. Scale will perform a self-test by displaying four 8s for three seconds. When "0.00 kg" or "0 lb 0 oz" is displayed on the screen, scale is zeroed-out and ready for normal operation.

B. Normal Weighing

1. Hang fish on the attached hook. Weight is displayed in either kilograms or pounds and ounces.

C. Switching between unit weights

1. Press and hold the POWER and CHOOSE button simultaneously for three seconds. Unit will change from weighing pounds and ounces to kilograms and vice versa.

D. Taring Weights

1. Weigh a bag or container till its weight is steadily displayed on the screen.

2. Press the POWER button once. Scale will zero-out and show "0.00 kg" or "0 lb 0 oz" and is ready for weighing multiple fish together.

E. Holding a weight

1. With the weight displayed on the screen, press the CHOOSE button. This will hold the current weight and is indicated by displaying an H to the left of the screen. To unlock the hold, simply press the POWER button.

F. Storing weights into memory

1. With a weight in the hold mode and an H displayed to the left of the screen, enter the memory mode by pressing the CHOOSE button. While in the memory mode, pressing the CHOOSE button will allow you to navigate through ten stored memories. These are indicated on the left and numbered 0 through 9. There are also 4 letters that indicate other options. An A shows the average of all stored weights. An E displays the total and a C resets the memory.

2. To store a weight, simply hold down the CHOOSE button for three seconds. Weights will automatically store into one of the number registers. To see the numbers with their weights, simply scroll through the numbers by pressing the CHOOSE button as described above.

G. Resetting the memory

1. With the unit in the C mode, press and hold the CHOOSE button for six seconds and scale will reset memory and zero out. Press the POWER button and scale is ready to begin weighing again.

H. Powering-off manually

1. Press and hold the POWER button for 6 seconds.