got a new sellus rod i like it but the reel seat keeps unscrewin im using 10# test and a inline spinner ( 1/2 oz ) think that might be causing it but i dont know its a pain every 10 cast or so tighting it up any suggestions?

You could make it permanent.

how

You could use electrical tape on the threads of the reel seat. I don't see why the rod would be doing that unless it is defective somehow.

i had a berkley amp rod do this too tried tighting it too much cracked it ill try the tape thanks

If over tightened the reel seat hood can crack or you can strip the threads on them. No weight lifting before tightening your reel down.

how

Super glue.

Teflon tape.

Just leave it and tighten up when needed, you won't do any damage. I've that happen to me, it isn't a big deal. A cardboard shim under the reel foot may help, but don't over tighten.

Teflon tape.

x2 You can tape the threads and wrap the feet as a type of shim as well if needed.