Hi Guys,

 

I wound up with a Quantum reel that has a busted IAR bearing (cracked race).

 

It's an easy fix and the reel is in decent condition.  Actually looks to have never been used and I'd like to do something with it.

 

Anyone have a part number?

 

Thanks!

 

Josh

Go to the website, they should have anything still available there. Just follow the process online - it works very well; used it several times.

X2. Alternatively, measure the dimensions IDxODxW and I may have one or I can check with Boca.  

Thanks guys.

 

I thought maybe they just used one size.  I don't have it with me and was doing some ordering.

 

Will measure when I get back to it!

 

Regards,

 

Josh

Side note, do you mean Instant Anti Reverse by ISR" or something else? One way roller bearings have no race, just the roller and cage assembly and an inner tube. So, I'm curious as to what part you broke?

J Francho,

 

Yes, it's the instant anti-reverse.

 

I didn't use proper terminology there, I guess.  It's the metal part of the cage outside the plastic.  (I tend to think of that cage as a race and the sleeve as an inner race, though I know they are not called that.  Figured ya'll'd know what I mean.)

 

Regards,

 

Josh

Ah,I know what you mean. I was just curious - many reels have a conventional ball bearing pack that goes right on top of the one way to keep the crank shaft aligned.

Bad break, rupturing that housing. Usually I see the inner tube or the plastic go before anything.

Yeah, I got it like this.  I was in parts in a bag, looked unused, so I bought it for a song and put it back together.

 

It's missing the tension cap and outboard bearing on that side.  I should have a parts reel laying around I can use for those things, but it still uses a dog and ratchet.

 

Josh

I have a bunch of junked Quantums in the Johnny Junkyard. If you can't find what you need, post a picture of the part - I might have it.

Thanks!  I'm planning on grabbing it and my digital calipers from the shop today.  (The dial calipers get to stay there.)

 

Regards,

 

Josh

Hello,

 

Grabbed 'em.

 

The bearing measures, looks like 16.10mm flat-to-flat on the outside.  It may be 16mm; with the housing busted it looks like elongated by just a bit.

 

ID measures 10mm.

 

Thickness is 8mm to 8.10mm (again, it's a bit off due to the busted housing.)

 

Looks like it should be 16mm OD x 10mm ID x 8mm thick.  It's hexagonal and measures about 17mm point-to-point.  Points are rounded as most I've seen.

 

Thanks!

 

Josh

Josh,

 

PM Sent