Currently i have a  G Loomis imx 721 sjr i love this rod but like to change up the real seat and try to build one as close as i possibly can to it. This is my first time building a rod would a St Croix SC4 4S66MLF rod blank be the same rod if i were to cut 6 inces off the blank?

 

any one else have any suggestions or advise?       Thanks

I am not a fan of cutting blanks.  Cutting from either end will slow the action.  I think you should keep looking and find a blank that, as designed, is what you want.  I know from my experience that as I built rods I got better with every one for a long time.  I also started with an expensive blank and ended up later on totally rebuilding the rod to get it right.  I recommend starting with an inexpensive blank to at least get one rod built before trying a $100 + blank.

 

What is the length power and action of the Loomis you like so well?

Six foot, light power, fast action IMX.  I don't think cutting any blank will give you the equivalent of that blank.  IMHO.  

 

Closest thing I've found is the SCV St Croix  .  SCV is a very high quality blank.

5S60MLF-G Bass/Walleye 6' ML FAST 1 4-10 1/8-3/8 0.425 4.0 1.1 $155.00                      

00

 

 

Look at the SC2 blanks from St Croix.  There are some 6 footers for about $75.  I'd rather learn on a $75 blank than a $150 blank.  Use running guides of about 4-4.5 mm to keep them light and you'll have a very sensitive rod.  Good luck!

Best thing to do is always buy the length that you want. You can cut a blank, but you void the warranty, change the action, etc.. 

 

We have over 800 blanks models to choose from. Most vendors have models that you "should" find that suites your needs. Taking an inch or so off the butt won't kill you, taking 3-4" will. 

 

If you have any questions, please ask away. 

Rainshadow Revelation has some blanks similar to what you're after, and they get high reviews from builders.  They also are reasonably priced.