purdue92

Looking for a Flicker shad and Shad rap rod #5 and #7 something i can cast farther then with my g loomis 721 light 6'0 looking at ateos avids and loomis trying to keep the price around or under 200 any suggestions (spinning rods)

Best Terminal tackle storage ideas to prevent tackle getting mixed up. i have tried multiple ideas and boxes and i like to have all my hooks(treble,bluegill,crappie /bass), swivels, weights( bell singers and split shots), snaps etc all in one box like a plano 3700 series.. problem i have is once i organize it i can not tilt the box or flip it upside down because eventually all my tackle will side under the dividers or over the dividers and get mixed up. what do you guys use to keep it all organized where it can be tossed around in a boat and dont have to worry about it

thanks i will have to see what fenwick offers,,, how about the other 2?

buying a few rods are theses the correct actions for application before i spend the money? I prefer the fenwicks these are the rods im looking at and how i plan on using them or is there a better rod i should get instead for the application Jerkbait rod/ Spook rod/ jig and senko around docks? fenwick aetos casting model # a661MFC power medium rod action fast rod length 6”6” Sniper spinner bait rod and all around spinner bait rod Fenwick aetos casting model # a681mhfc POWER medium heavy rod action fast rod length 6’8” Deep cranking rod Fenwick hmg casting model HMG72M-MFC power medium action moderate fast rod length 7’2” Alabama rig rod Fenwick hmg casting model hmg70mh-fc rod power medium heavy action fast rod length 7’

Now is the avid the 6 foot and the avid x ?

I was looking at the aetos and the other line ups fenwick offers and i want a that is one piece. mostly i used my imx rip rigging flies for white bass when they run / casting flicker shads and small rattle traps and tubes plastics jigging for walleye and finesse fishing for bass year long.... my imx 721 is pretty much my go to rod. trying to find the closest thing to it as a backup so i can have different rigs typed up. i looked at the avids and there nice rods just i like the feel of the fenwicks better but having a hard time matching it up

currently i have a g loomis imx sjr 721 and its the best rod i probably ever owned i am a big walleye guy. i like to get a rod as close as i can to this rod under 200 i really actually like all the fen wicks and how they feel in my hand over the loomis does anyone have know of a rod that has as close as a blank/ rod and the loomis imx 721in the fenwick lineup?

Trolling for perch has anyone tried this? what type of setup? how do you pattern the perch through out the year? (Great lakes)

Thanks I'll look into it just wanted to stock up

looking at buying some crankbaits, jerkbaits and rattle traps has anyone tried the already painted netcraft ones that come without the hooks and or the angile lures online, just want to know your review. looks like by the time buying hooks they will be about half the price compared to the others that are all done

thanks any suggestions on a low end rod for both of those applications ?

Quick question I rarely throw deep cranks and the Alabama rig can I get one rod for both ? Or is it a must to get two bcus of actions I'm looking at the mojo bass and premier rods

in your opion who has the fastest and best electic fillet knife currently i have a rapala all black with the cord and its good just on the slow end compared to a mister twister but i burnt up 4 mister twisters over the years i use it to clean white bass by the cooler full.

looking at upgrading all my bait casting rods what type of rod lineup are the best under 200 going to pick up a spinner bait rod 2 cranking rods and a jig rod are the avids the way to go ?

well i want to get the axc68mxf for spinnerbaits what rod do i need for crankbaits shallow and deep divers? jerkbaits and spooks? casting football jigs draging around on ledges?

does any one have a list or can make a list on what each avid rod is ment to be used for?

thanks for the help any suggetions on color tubes or just stick to green pumpkin and watermelon?

now i have caught them using spinnerbaits slow rolling them thats been my go to in the weeds. ill have to check into the tubes i heard about it just never tryed it

Looking for a all around spinnerbait rod that i mostly can use to throw in a pinpoint location anyone have a prefrece between the St croix avid AXS68MXF vs st croix lengend tournment TBC69MHMF (sniper spinnerbait)

One of the lakes i go to has all kinds of crawfish and the walleyes have there bellys full with crawfish. has anyone tryed just dragging a 3/4 skirted football jig with like a hula grub trailer around stucture to catch eyes? I been looking around online havent seen this topic? anyone else have any suggestions on how to mimic a crawfish presintation to catch them ?

i had pour my own jigs (football). alot of times i like to skip the smaller jigs around docks but my tailers tend to slip and not stay on because of my jig keeper is not good enough. has anyone tried this does it work to hold my trailers on. or does anyone have any other suggestions??? tackle warehouse the trailer keepers the trailer hitch http://www.***.com/Trailer_Keepers_The_Trailer_Hitch/descpage-HSTKPTH.html

best reel under $200 ? using it for a spinnerbait-spook - jerkbait rod thinking gear 6.3.1 rod is a avid avc68mxf

Now i have used the spinnerbait in a area that has weeds cought a few in that area (mostly big) the bite stops and i pick up and move to a new area simlar with weeds and i keep doing this. my question is that the lake i am on is loaded with crawfish the walleyes bellys are full and and they spit them up. has anyone used like a weedless football jig with a hula grub to catch them and if so what plastics could you use or sugjest to copy this? just thinking of ways that i can have a second approch to catching the eyes other then a spinner.

Currently i have a G Loomis imx 721 sjr i love this rod but like to change up the real seat and try to build one as close as i possibly can to it. This is my first time building a rod would a St Croix SC4 4S66MLF rod blank be the same rod if i were to cut 6 inces off the blank? any one else have any suggestions or advise? Thanks