Jump to content
Sign in to follow this  
bpNClgmouth

Rod Modules?

Recommended Posts

Got a Quantum PT rod and Shimano Compre.  Both $109 7ft MH rods.  Quantum PT says it has 54 Million Module Blank while Compre says it has 70 million, does this make the compre better, more sensitive, etc.?

Share this post


Link to post
Share on other sites

I have posted this many times before over the years it is a little ditty from the best rod building site on the net....

Author: Andy Dear, Lamar Manf.

Good evenin' folks,

I may be about to open a SERIOUS can of worms with this thread, but what the heck.....here goes anyway. Being in the blank distribution business, I get asked A LOT about the construction and makeup of the various graphite rod blanks that I sell. And, I have to say that whenever somebody asks me about modulus I just cringe! Here is why; It seems that about 90% of the folks that email me want to know what the modulus is of the blank(s) they are considering buying. When I ask "Why do you want to know that" they can't really give me an answer....they're just convinced that higher the IM rating is better. Here is how the conversation usually evolves:

Mr. Customer: What modulus is that blank made from?

Andy: Well, if you must know, it's about 40million Msi

Mr. Customer: What does that mean?

Andy: Well, it means the blank is made from the material you have come to know and love as IM6

Mr. Customer: Oh, that's too antiquated...I only fish with IM7 and higher.

Andy: Really? Did you know that the difference between IM6 and IM7 is not the modulus it's the tensile strength?

Mr. Customer: Really?

Andy: Yeah REALLY!

Mr. Customer: Eh Hhhmmm....erreer, uh, oh....well uh....well Bass Pro Shops says...

Andy: Forget Bass Pro shops...let's look at the numbers (at this point Andy whips out his trusty data chart that illustrates the differences between the different fibers that actually have IM designations). Here take a look at this. This comes from a chart put together by the folks at Hexcel (http://www.advancedcomposites.com/technology.htm)

The number on the far right is the modulus of the fiber, and the number in the middle is the elongation to failure or stretch.

Hexcel IM4 600 40

Hexcel IM6 760 40

Hexcel IM7 780 40

Hexcel IM8 790 44

Hexcel IM9 920 42

Mr. Customer: You Mean all this time I thought I was getting a higher modulus fiber with the higher IM rating, when what I was really getting is a fiber that stretches more?

Andy: Well, in some cases you are, and in some cases you aren't. The fact is though that the difference between IM6 and IM7 is nothing in terms of modulus, and compared to IM8 it's only slightly higher. Wow...look at that IM9 actually has a lower modulus than IM8...go figure Now, many companies are using fibers with a much higher modulus, like 57 and even higher, however these fibers don't necessarily use the IM ratings. So, whenever you see a fiber with an IM rating...BUYER BEWARE! THE HIGHER THE IM RATING, DOES NOT NECESSARILY MEAN THE HIGHER THE MODULUS!!!

The point is this folks...just because you have a blank made from a high modulus fiber, doesn't means it's a good rod! And vice versa, just because you have a blank with a low modulus...even the original fiber blanks were made with (33 million) doesn't mean it's a bad or outdated rod. It's all about what the designer does with it.

I know there are some of you that may already know this, but judging from the amount of calls I get on a daily basis from folks who ONLY want IM7 or IM8, but can't really tell you why, I have to believe they don't really know what they are talking about at all. They've just been sucked into the marketing machine that leads people to believe that the higher the IM rating, the lighter and more sensitive the material, which is not always the case.

Be forewarned that there is A LOT more to graphite blank construction, performance, quality, sensitivity, weight etc... than just what modulus the fiber is. There are lots of other variables like flag patterns, and wall thickness, and resin systems, and mandrel design....It's all about the talent of the designer, and what he is able to do in terms of the sum of those variables...not just the friggin modulus!

Whewww...ok I feel better now...

My aforementioned explanation of modulus and IM ratings is by no means meant to be anything more than a brief primer for the folks who didn't realize what the differences with the IM ratings were. I hope this clears things up a bit, and I hope that some of you will chime in on this as well. Oh, here is a link to the Hexcel page for those of you who want to investigate the matter further. Do a search for IM6 and you'll get some interesting info. (if you're into that kind of techie junk).

[www.hexcel.com]

[www.advancedcomposites.com]

Now, this gives you some ammunition...next time you stroll into BassPro, and some yahoo tries to sell you a rod based on it's IM rating, ask him to explain to you why the higher IM ratings are better. When he replies by sayin' that the higher the IM rating means more sensitivity, less weight etc....just tell him that you have a blank at home made from IM2000, and see what he says.

Regards,

Andy Dear

Good Luck & Tight Lines!!!  

Share this post


Link to post
Share on other sites
I miss Andy.  

Yup Karen (Bingham ent.) and I both do..

Sold the Co. and moved on...

I understand the new guy that has it all now, has changed the makeup of the burl we liked so well, and, that is why Karen had that special going on Andys old stuff..

Sorry didn't mean to highjack.....

Tight Lines!!!  

Share this post


Link to post
Share on other sites
I miss Andy.

Yup Karen (Bingham ent.) and I both do..

Sold the Co. and moved on...

I understand the new guy that has it all now, has changed the makeup of the burl we liked so well, and, that is why Karen had that special going on Andys old stuff..

Sorry didn't mean to highjack.....

Tight Lines!!!

Since we are off topic, I did have an email conversation with Andy a few weeks ago.  He reports that he's doing well and in a new industry.  

I'm not 100% sure which cork I got in my last order...  it's been little different the last few times, but I figured that was a lot to lot change as opposed to a formulation change.  Do you know what exactly changed?

Share this post


Link to post
Share on other sites

I rarely use the burl - but good to know it's different now. Scott's a good guy and has really taken a lot on buying Fishsticks, the former products made by Lamar, launching some new lines, and still running some other things. It would make my head spin!

I keep that post by Andy printed and let folks read it.

The whole thing can be viewed here http://rodbuilding.org/read.php?2,156787,page=1 - there's a whole lot more detail past what ReelM. posted. Pretty complex stuff but very informational. Doesn't even touch on the whole multi modulus thing either!

Andy's a great guy. I had problems learning to do finish back when I first started and worked with me and in very short time I had beautifully even finish and it seemed so easy with his guidance!

Share this post


Link to post
Share on other sites
I have posted this many times before over the years it is a little ditty from the best rod building site on the net....

Author: Andy Dear, Lamar Manf.

Good evenin' folks,

I may be about to open a SERIOUS can of worms with this thread, but what the heck.....here goes anyway. Being in the blank distribution business, I get asked A LOT about the construction and makeup of the various graphite rod blanks that I sell. And, I have to say that whenever somebody asks me about modulus I just cringe! Here is why; It seems that about 90% of the folks that email me want to know what the modulus is of the blank(s) they are considering buying. When I ask "Why do you want to know that" they can't really give me an answer....they're just convinced that higher the IM rating is better. Here is how the conversation usually evolves:

Mr. Customer: What modulus is that blank made from?

Andy: Well, if you must know, it's about 40million Msi

Mr. Customer: What does that mean?

Andy: Well, it means the blank is made from the material you have come to know and love as IM6

Mr. Customer: Oh, that's too antiquated...I only fish with IM7 and higher.

Andy: Really? Did you know that the difference between IM6 and IM7 is not the modulus it's the tensile strength?

Mr. Customer: Really?

Andy: Yeah REALLY!

Mr. Customer: Eh Hhhmmm....erreer, uh, oh....well uh....well Bass Pro Shops says...

Andy: Forget Bass Pro shops...let's look at the numbers (at this point Andy whips out his trusty data chart that illustrates the differences between the different fibers that actually have IM designations). Here take a look at this. This comes from a chart put together by the folks at Hexcel (http://www.advancedcomposites.com/technology.htm)

The number on the far right is the modulus of the fiber, and the number in the middle is the elongation to failure or stretch.

Hexcel IM4 600 40

Hexcel IM6 760 40

Hexcel IM7 780 40

Hexcel IM8 790 44

Hexcel IM9 920 42

Mr. Customer: You Mean all this time I thought I was getting a higher modulus fiber with the higher IM rating, when what I was really getting is a fiber that stretches more?

Andy: Well, in some cases you are, and in some cases you aren't. The fact is though that the difference between IM6 and IM7 is nothing in terms of modulus, and compared to IM8 it's only slightly higher. Wow...look at that IM9 actually has a lower modulus than IM8...go figure Now, many companies are using fibers with a much higher modulus, like 57 and even higher, however these fibers don't necessarily use the IM ratings. So, whenever you see a fiber with an IM rating...BUYER BEWARE! THE HIGHER THE IM RATING, DOES NOT NECESSARILY MEAN THE HIGHER THE MODULUS!!!

The point is this folks...just because you have a blank made from a high modulus fiber, doesn't means it's a good rod! And vice versa, just because you have a blank with a low modulus...even the original fiber blanks were made with (33 million) doesn't mean it's a bad or outdated rod. It's all about what the designer does with it.

I know there are some of you that may already know this, but judging from the amount of calls I get on a daily basis from folks who ONLY want IM7 or IM8, but can't really tell you why, I have to believe they don't really know what they are talking about at all. They've just been sucked into the marketing machine that leads people to believe that the higher the IM rating, the lighter and more sensitive the material, which is not always the case.

Be forewarned that there is A LOT more to graphite blank construction, performance, quality, sensitivity, weight etc... than just what modulus the fiber is. There are lots of other variables like flag patterns, and wall thickness, and resin systems, and mandrel design....It's all about the talent of the designer, and what he is able to do in terms of the sum of those variables...not just the friggin modulus!

Whewww...ok I feel better now...

My aforementioned explanation of modulus and IM ratings is by no means meant to be anything more than a brief primer for the folks who didn't realize what the differences with the IM ratings were. I hope this clears things up a bit, and I hope that some of you will chime in on this as well. Oh, here is a link to the Hexcel page for those of you who want to investigate the matter further. Do a search for IM6 and you'll get some interesting info. (if you're into that kind of techie junk).

[www.hexcel.com]

[www.advancedcomposites.com]

Now, this gives you some ammunition...next time you stroll into BassPro, and some yahoo tries to sell you a rod based on it's IM rating, ask him to explain to you why the higher IM ratings are better. When he replies by sayin' that the higher the IM rating means more sensitivity, less weight etc....just tell him that you have a blank at home made from IM2000, and see what he says.

Regards,

Andy Dear

Good Luck & Tight Lines!!!

excellent!!! i hope some people will read this so they will realize what they are buying

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.

  • fishing

    bass fishing

    fishing forum

    fishing rods

    fishing rods

    fishing rods


    fishing rods

    fishing reels
    fishing gear

    Truck Caps

    fishing reels
    fishing reels

    fishing

    bass fish

    fish for bass
    fish

×