spinners

INTERESTED IN =YOUR FAVORITE CRANK BAIT ROD, AND WHY.I'AM LOOKING FOR A COUPLE,TO REPLACE SOME BADLY WORN ONE'S, AND WANT TO UP GRADE SOME AT THE SAME TIME, ALSO THROWING SOME BIG SWIM BAIT'S,WHAT'S SOME OF THE LIGHEST ROD'S AND HOW DURABLE ARE THEY.7/FT OR LONGER...ANY INPUT IS APPRECIATED. THANK'S SPINNER'S

INTERESTING POST=I LIVE IN KENTUCKY AND DID NOT KNOW OF A STATE, THAT HAD, A SEASON ON BASS,I FISH IN TENN. AS WELL ,I GUESS THE OLD SAYING IS TRUE, YOU DON'T KNOW WHAT YOU HAVE UNTIL IT'S GONE.I'AM SURE THE REGULATION'S ARE THERE FOR A GOOD REASON,AND THE ==D.N.R.= TOLD YOU IF YOU CAUGHT ONE, THROW IT BACK.SOUND'S SIMPLE ENOUGH. GOOD LUCK SPINNER'S

I LIKE THE ONE "EYED JIG"TALE A GOOD ONE,A COUPLE YEARS AGO ,I STARTED THE SEASON OFF FISHING A 3/4 OZ SPINNER BAIT,CHART.AND WHITE,CAUGHT A GOOD BASS ,ON IT, AND NO MATTER HOW HARD I TRIED TO CHANGE, I STILL USED THAT SAME BAIT, ALTHOUGH I HAD A DOZEN JUST LIKE IT,I FOUND MY SELF TAKING THE SKIRT'S OFF THE OTHER'S TO FIX IT ,WELL THE WIRE FINALLY BROKE AND I FOUND THE FISH WOULD HIT THE OTHER'S JUST THE SAME,SO ENDED THAT IDEA ---LUCK FAVOR'S THE PREPAIRED MIND---I'AM A FIRM BELIEVER IN THAT--

I HAVE HOOKED MYSELF THREE TIMES IN THE LAST YEAR,THE FIRST I WENT TO THE HOSPITAL IT, WAS IN A FINGER TIP AND I JUST COULD NOT GET IT TO BUDGE AT ALL,BUT AFTER I SAW THE BILL FROM THE E.R.I FOUND I COULD TAKE MY POCKET KNIFE AND MAKE A LITTLE ROOM FOR THE BARB,AND GET AT LEAST MOST OF THEM OUT,A FEW TEARS AND SOME BLOOD COST A LOT LESS THAN A VISIT TO TH LOCAL E.R.-------I WOULD SUGGEST HOWEVER CARRYING SOME ORA GEL-FOR A TOOTH ACHE IN YOUR BOAT --YEA- COMES FROM EXPERANCE :-[

PERSONAL SCALE,I DID GET LENGTH AND GIRTH MESURAMENT'S=BEFORE I LET HER GO I HAVE CAUGHT 3=TEN POUNDER'S OUT OF THIS LAKE,DON'T TELL ANY ONE ;D

BIGGEST L.M.B. WAS 13.54, MARCH 27 2008, WATER TEMP.51- DEGREE'S AND JIN CLEAR.CAUGHT IN 4 FT OF WATER,ABOUT 8 FT. FROM SHORE,3/4 OZ= PINE MT SPECIAL, SPINNER BAIT=CHART.AND WHITE SKIRT.GOLD BLADES #3 COLORADO AND # 5 INDIANA,,FAST RETRIEVE,THE LAKE IS ABOUT 160 ACRES,IN SOUTH EAST KY.ABOUT 75 FOOT AT DEEPEST POINT AND VERY CLEAR,, SPINNERS

I HAVE MOST OF THE COLORS OFFERED , BUT I CAN'T FIND THE BLUEGILL COLOR,,I TRIED CONTACTING STRIKE KING CAN'T SEEM TO GET THROUGH ,ANY ONE KNOW WHO HAS THEM,,,,,,,ALSO ANY OF YOU GUY'S PAINT BAITS I HAVE A FEW RAPALA'S AND CORDELL SPOTS COULD USE A NEW COAT,,,,,,,,,,,,,,, THANKS,,

I USE A PAINT ROLLER ABOUT 6 " TIGHT KNAP..THE HOOK STAYS HOOKED BUT COMES OUT EASY.

THANKS A LOT GOING TO USE IT ON THE CONSOLE,DIDN'T WANT TO HAVE TO TAKE THE OTHER ONE LOOSE SINCE, IT IS GLUED I ONLY HAD IT IN ABOUT 3-MOS.

WILL THE 200 MHZ TRANSDUCER ON MY 522 IGPS ,,WORK ONTHE THE NEW HIGH DEFINSTION MODELS

I USE COD LIVER OIL FOR THE BASE AND GARLIC,ETC

THEY LOOK GOOD ,BUT THEY WILL LOOK A LOT BETTER AFTER A FEW BIG BASS HAVE SKINNED THEM UP

MAN, THOSE ARE SOME GOOD LOOKING JIG, SKIRTS AND SPINNER BAITS.I USE THE PLIERS AND THE SKIRT TOOL FROM BARLOW'S TO MAKE THE SKIRTS, BUT I FOUND A WAY THAT IS JUST AS EASY.COST'S ABOUT A DOLLAR....IF YOU SHOOT A BOW TAKE AN ARROW WITH A FIELD TIP.CUT THE ARROW OFF 4 OR 5 IN.PULL THE FIELD TIP OUT WITH THE INSERT ATTACHED IF YOU MAKE YOUR ARROWS YOU WOULD PROBLY HAVE A PIECE LEFT OVER.SLIDE THE RUBBER KEEPERS. OVER THE FIELD POINT ONTO THE SHAFT.AS MANY AS YOU WANT PULL THE TIP OUT (WITH INSERT ATTACHED)RUN A PIECE OF WIRE IN THE SHAFT BEND THE TIP OF THE WIRE A LITTLE (THE WIRE HAS TO REACH ALL THE WAY THROUGH THE ARROW SHAFT) HOOK THE SILICON MATERIAL WITH THE BENT END OF THE WIRE PULL THE SKIRT THROUGH ROLL THE RUBBER KEEPER OF ON THE SKIRT CLIP THE ENDS,, READY TO USE.IT IS EASY TO KEEP ON THE BOAT REALLY WORKS GREAT. HOPE THIS HELPS SOME ONE....

THE BEST REASON TO HELP SOME ONE IS BECAUSE YOU CAN,THAT IS SURE A FACT.

I UES THE ZIP TIES ON SOME OF MY SPINNER BAITS AFTER HAND TIEING ,DOES ANYONE KNOW WHERE I CAN BUY THEM IN BULK. T.I.A.