BassAddict1911

I gotcha ... any weight on the soft stick?

yeah .... just what I was gonna say ... and darnit, I was excited there for a min!

Hey guys, I was just curious ... what would yall say are the best conditions to go for a reaction strike vs. non-reaction strike?

Haha this made my day ! GOVERNMENT PIPE SPECIFICATIONS 1. All pipe is to be made of a long hole, surrounded by metal or plastic, centered around the hole. 2. All pipe is to be hollow throughout the entire length -- do not use holes of different length than the pipe. 3. The ID (Inside Diameter) of all pipe must not exceed their OD (Outside Diameter) -- otherwise the hole will be on the outside. 4. The pipe is supplied with nothing in the hole, so that water, steam or other stuff can be put inside at a later date. 5. All pipe is to be supplied without rust; this can be more readily applied at the job site. (NOTE: Some vendors are now able to supply pre-rusted pipes. If available in your area, this product is recommended as it will save a great deal of time at the job site.) 6. All pipe over 500ft (150m) in length should have the words "LONG PIPE" clearly painted on each side and end, so the contractor will know it's a long pipe. 7. Pipe over 2 miles (3.2km) in length must also have the words "LONG PIPE" painted in the middle so the contractor will not have to walk the entire length of the pipe to determine whether it is a long or short pipe. 8. All pipe over 6ft (1.83m) in diameter must have the words "LARGE PIPE" painted on it, so the contractor won't mistake it for a small pipe. 9. Flanges must be used on all pipe. Flanges must have holes from bolts that are quite separate from the big holes in the middle. 10. When ordering 90 or 30 degree elbows, be sure to specify left-hand or right-hand, otherwise you will end up going the wrong way. 11. Be sure to specify to your vendor whether you want level, uphill or downhill pipe. If you use downhill pipe for going uphill, the water will flow the wrong way. 12. All couplings should have either right-hand or left-hand threads, but do not mix the threads. Otherwise, as the coupling is being screwed on to one pipe, it is being unscrewed from the other. 13. All pipes shorter than 1/8in (3mm) are very uneconomical in use, requiring many joints. They are generally known as washers. 14. Joints in pipes for water must be watertight. Those pipes for compressed air, however, need only be airtight. 15. Lengths of pipes may be welded or soldered together. This method is not recommended for concrete or earthenware pipes. 16. Other commodities are often confused with pipes. These include; Conduit, Tube, Tunnel, and Drain. Use only genuine pipes.

Hey Guys, here recently i have been playing around with FLW fantasy fishing, but I have yet to meet anybody else that does it. I was wondering if anybody else on here plays it, and if so, if yall would maybe want to start a league, or possibly are part of a league I could join? Thnx!

great idea, and you rocked that sketch bro! I wonder if the art section at Harvard will accept fishermen ... ?

I have yet to go wrong with a junebug senko rigged wacky, last week caught a 3, 6 and 7lbr in one day ... my go-to bait

hahaha, just made my night He's right on the money though - anytime is fluke time!

the picture clearly shows ... umm?

took the words right outta my mouth ...

Right on the money. You want to make a good first impression. Best of luck to ya in this adventure buddy!

1) Ranger 2) Chevy Trucks 3) Abu Garcia 4) Berkley 5) YUM ... If only ALL dreams came true...

just curious ... is this not the tackle section?

thanks guys!

my new favorite rig, won a tournament with it a week ago. My favorite worm is a YUMdinger, in junebug or peanut butter jelly color. For a hook I go with a 2/0 widegap ... with this setup you cant go wrong brother! Good luck to ya

Some strike kings, and one that was given to me by David Dudley himself!

Wanted to thank you all who gave me the squarebill advice, used that bad boy in a tourney this weekend and placed 1st with a solid 15lbs! Owe it all to the squarebill ... many thanks for the help guys!

same here.

thanks for the help guys, I appreciate it!

ok, i gotcha. does it get hung up often this way though?

I'm fairly new to squarebill cranking, but i've heard its the bomb this time of year. Ive done some reading on them, and I know their primarily for deflecting off structure, but what is the best retrieve to accomplish this?

just be patient with him and try to teach him slowly ... you were a beginner once too, try to remember how you were taught, and do the same with him.

ok, I wasn't sure..

the craw, that thing'll work wonders ...

yup, alot of times you will have to bend them some once you get them from the store, but gettin those suckers fine-tuned is definately worth it!