Carterjig68

Absolutely! Spinnerbaits/Keitechs/Etc-Shimano Metanium DC 7 6:3:1 Gear ratio/ Dobyns Champion Extreme 7' MH fast action Jigs-Shimano Metanium H 7:4:1/Shimano Champion Extreme 7'4 Mag Heavy fast action Jerkbaits/popper-Shimano Scorpion 1000 6:4 or 6:3/ Shimano champion 6'8" MH CB Squarebills-Shimano Scorpion 200 6:3:1/ Dobyns Champion 7' MH CB Glass Chatterbaits/Deep crankbaits- Shimano Citica 200 6:3:1/ Dobyns Champion 7'3" Heavy Glass CB Blade baits/ medium cranks-Shimano Caenen 6:3:1/ Dobyns Fury 7' MH CB Big topwater/swim jigs/ traps-Shimano Chronarch Ci4 7:6:1/ Dobyns Fury 7'3" MH Fast action Frogs-Shimano Exsence DC 8:0:1/ Dobyns Fury 7'3" Mag heavy fast action Swimbaits/ A rigs-Shimano Chronarch 200e7/ Dobyns Fury 7'9" MH Fast action Finesse-Shimano Stradic 2500 Fj/ Dobyns Champion 7' Medium light fast action Stupid tubes-Shimano Symetre 2500/ Dobyns Champion extreme 7'6" medium heavy fast action Sorry if some of the gear ratios are off... i think i got them all though.

My arsenal for 2017 is all set. It's taken a while and a lot of hunting for good prices but i'm all set with Dobyns Rods and Shimano Reels. 4 are JDM so far, but i'm looking to build.

I'd say it could help to go somewhere in the middle, maybe a 6'8 or 6'10. Personally i throw buzzbaits and big walking baits on a different setup so a 6'8 seems to be perfect for poppers and smaller baits plus jerkbaits. The best i've found so far is a Dobyns Champion 685 CB for this technique.

i believe the exsence is 8.5 oz

Yeah for me the weight wasn't a huge issue since i was using it as a heavy duty reel. As for the whine, it's music to my ears.

I have heard a lot of talk about DC reels mostly good and I wanted to try one for a while. Now I own an exsence DC and a Metanium DC. The essence seems to be more of a beefy reel internally so i use it for jigs. The metanium i use for fish head spins, small keitechs, and spinnerbaits. Both cast extremely well and perform flawlessly. I am wondering, have you guys had experience with DC reels? I am curious if anyone else has had any positive/negative experiences with them.

Several for me. I love the older curado 200e7s for sure but there is something about the scorpion 200 that i love. I'm not sure if it differs spec wise from the newer curado 200s but it feels buttery smooth. Overall though, my metanium dc and excense dc have both performed flawlessly.

That's the same for me. The stryker top seeks a bit less intense than the surf top but it seems plenty warm. Right now i wear under armor gloves in normal conditions which don't really keep my hands dry but help a bit with warmth. During long runs i use ski gloves over them.

Coming from the midwest we have some 90 degree summers and some 0 degree winters so rain gear choice can be very important. I've been using frog togg pilots for a few months until i realized how they feel in very cold weather. They seemed to do alright with water and would be solid in the summer, but weren't cutting it in the winter. Decided to pull the trigger on a stormr stryker jacket and bib and can say that it seems like it will end up being worth it. Next on my list are some quality cold weather gloves. Anyone have any favorites for those freezing and wet pre spawn days? Anyone else have any experience with stormr gloves or other gear? Thanks!

The dobyns fury 765 is very stout, as it is a flipping stick. The fury on the other hand has a very nice soft tip but plenty of backbone.

I've been thinking of getting a similar combo myself, mainly for finesse jigs and small plastics. It would be a fantastic setup.

I have used both. I had the 734 originally and it handled baits 3/8+ well but i ended up liking the extra flex of the 733. I'm now moving on to the dx 703 as it has the length i like for close quarters, but the 3 power seems the most versatile.

Depends on the length you'd like, but the dobyns fury 735 is a fantastic rod for around that price range. It's a mag heavy but the tip on it is fantastic for what you would want.

I'll mainly be using it for vision 110s, shadow rap deeps, and some duo realis 100-110 Yeah I was thinking of trying the 685 although that could be a bit too much rod which is why I was considering the 682

Hey guys, I'm trying to step up my jerkbait game this fall and winter and I am looking at a few rods. The 684 and 685 CB dobyns champion, which seem to be made for Jerkbaits although I've heard they are a bit too whippy, and the 682. This is not a cranking rod so it would be a bit faster. Have any of you used these rods? Any advice would help. Thanks.

Hey guys, I snapped off the second to top guide on my Dobyns champion 765CB glass. I do believe that the rod is usable but I am curious if that could be for the long run. I can most likely have it fixed but I was just curious if this was necessary. Thanks

I own a few Fury's and the 733 is an awesome rod for chatterbaits, as is the 705CB. I have used Jadewoods and personally like the Dobyns better even though the J2 is a good rod.

Awesome. Thanks for the tips. Best of luck on the rebuilding.

We actually just considered the chance that our hummingbird is wrong, because we fly past most boats on the water.

Hey guys, my dad and I have a 2004 tr 21 with a merc racing 250 optimax. We can get it to around 65 before it chine walks although we have hit 70 once and can get it to around 67-68 sometimes. We feel that it could potentially go faster and are wondering if you guys had any tips to help with chine walking or overall speed. Thanks.

Ok so currently I have a spinnerbait rod that is a dobyns savvy 734 (7"3 heavy fast action) and a Chatterbait rod which is a 733 fury (7"3 mh fast action) which feels slower. I am now considering throwing both spinnerbaits and chatterbaits on the 733 and using the 734 for swimjigs with 40 lb braid. Any thoughts? Would this be better since the 734 is pretty stiff?

I was curious what you guys used for fish head spins? I have a 6"6 Veritas and I'm using that for now but I was curious what was recommended. I'm also curious about what line people use.

Hey, I've mainly fished fluoro with jigs but I'm starting to like pline copoly for many applications. Have you guys used it for jigs? I'm thinking of going with 20lb copoly for jigs, any thoughts

Good responses I actually use those, but for future reference I'm talking about big swimbaits.

Hey, I fish Indiana and swimbaits aren't exactly popular here but I want to start throwing them. Anyone have any advice about swimbait fishing the Midwest? Any baits come to mind?