I just had a jig weedguard fall out, What is the best way to fix it? Would Suoer glue be ok?

  -gk

super glue works, but i prefer gorrilla glue's 5min epoxy, put that on and hold it in place for 5 mins and then let it dry over night.

super glue works, but i prefer gorrilla glue's 5min epoxy, put that on and hold it in place for 5 mins and then let it dry over night.

+1... that's not going to fall out again.

super glue works....sort of.

Use an epoxy.  There are tons of choices of fairly inexpensive two part epoxies that you just squirt out and mix with a toothpick or something and you're done.  Gorilla Glue will work as well.  Be forewarned, Gorilla Glue will expand as it dries.  Don't go overboard with it.

If its a regular fg30 weedguard (1/8" ) take a 1/8" drill bit, dremmel tool works perfect, and clean out the hole first, no need to go overboard but whatever epoxy or glue you use will go alot farther if its glued to a nice clean surface

loctiite super glue gel. works great.

loctiite super glue gel. works great.

That is the only glue that I use on wg.

use a gel or an epoxy.  Otherwise you run the risk of it shooting up the fibers and making a solid weedgaurd at the bottom.