tennwalkinghorse

2X

Must be 12volts only feeder wire will be the wire that feeds the line side of the fuse block or switch panel the side going to your accessory's is the load side. So it will be lets say a 10gauge wire from the + side of the 12volt battery to the line side of the panel or block Hope this is of help Good luck

Try using a 41/2in angle grinder to remove the heads of the screws then put vise grips on stud and work them back and forth may want to put liquid wrench and soak over night before using vise grips. Studs will either come out or broke off in that case must drill out and re tap holes.

Sweet Good Luck

2X

all chargers are different read your manual all so may want to check the battery with a hydrometer to see if all cells are good JMHO

Really need more info on what you are doing. In general 6gauge for trolling motors and 14gauge for accessories should be fine. Wire size all depends on amp draw and length of wire run. If using a fuse block or switch panel your feeder wire should be 10gauge again depending on amp draw. Hope this is some help to you.

2X Sweet Ride Good Luck

Congratulation on your new boat just one word if the bottom is 32 in. I would not go to high up on the decks may get tippy on you. Good Luck on your build and try to think out of the box easier to do things now before the decks are on all so run your wiring thru pvc pipe in case you want to or need to pull new wires.

I have used mine for frogs and it worked fine ,except in real heavy cover I feel the brakes come on to soon for top water stuff JMHO

Both are GREAT

Good Looking Project to be honest your a better man then I , I would not want to grind that Sh-t. Lots of Luck looking forward to more pics

I use Interstates they work for me batteries are like trucks its a matter of opinion I guess 3 - 5 years is average life for most. JMHO

Home Depot or a plumbing supply house . If you are talking about a check valve . Make sure you follow the arrows on the valve for flow and be aware there are check valves for horizontal and vertical applications. Hope this was some help to you good luck

Greatoutdoors nice looking rig. I have seen decks on 10' but they were low I think it would be tippy JMHO

2X

Dividing watts by volts will give you amps. i.e : 30watts divided by 12 volts = 2.5 amps so just make sure you don't over load the circuit you all so need to use the right size wire. Just remember you don't want to put all your eggs in to one basket if the breaker trips and you have a short you will lose every thing running off of that breaker. As for double protection using a fuse and a breaker if they are the same rating meaning both say 15 amps normally the protection device closest to the power source will blow or trip first , it is not necessary unless you are trying to protect say you fish finder and it calls for a 3amp fuse and you are powering it off of a 15amp breaker as its feed. Then you would use a in line fuse. Hope I was of some help to you. Good Luck

2X

Welcome Aboard

Justin

Welcome Aboard

2x or a small gas generator or will someone steal it? :-?

Looks like a nice rig I just finished my 14' Jon so I know how you feel. Good Luck

So what was wrong? Glad there working

Looks good keep the pic coming nice family great to have help.