FishingBuds

Yea, it will start then when you give it gas peddle it wants dies. Then the pump won't work, let it sit then it starts up, but does everything all over again. But have to drop the tank! dang it

My 96 S10 truck quit running on me today, I took off from work and half way down the street it just died, like it ran out of gas. I just filled up in gas yesterday, : My best guess is the fuel pump, but I'd like to ask if you think that a relay could be another choice? If a relay goes out wouldn't it go out and not let a vehicle start? I don't think one could go out while your driving and kill the engine like it just ran out of gas? I'd like to see if I could TRY and fix it myself, a mechanic wants $500 to replace a fuel pump, but if a relay could do this then off to the mechanic I go.

You said it brother! Stop cutting the trees down, leave the Forrest alone everywhere What? Does that mean your going to tear down your house made of wood? Trees are renewable and a great source of product if managed properly. Now the climate thing.... of course climate changes. Whether or not its accelerated by man or not we'll probably never know. You can put all the data together you want but its hard to creat data for years past without some sort of error. Honestly, here in Indiana, I'm pretty sure we are having a second ice age. The normal temps this time of year are like 44 degrees, the high today is 28 and we've had very few above 30 in feb. The Earth varies naturally, it just makes sense to curve our pollution as much as possible though. Obviously your serious on this. : No im not tearing down my house :

I passed that one up after comparing it with its other models, heres where i went http://www.marlinfirearms.com/Firearms/1894centerfire/1894SS.asp

Great report, I'll see if they got a web site. wait a minute do they have a web site?

You said it brother! Stop cutting the trees down, leave the forrest alone everywhere

Thats close enough for me, thats a threat

1) My opinion on handle location, is where I like it ;D , I have built only spinning rods, so what I do is place the reel seat on my blank and I handle the rod like as if im operating a bait/lure thru the water and move the seat up or back to find my comfort. I like a rod thats tip heavy for worming, example 2) so far I have loved the skeleton seats, you know this stuff only comes if you try one in a build, some don"t like them and if I would have went by what they say, then of course I wouldn"t have never tried one. if it interest me and after I read up on a product and it makes sense, I try it.I still ask alot of questions here and there on blanks more than hardware. so yea, I think they are a first choice on my spinning rods, I usually stay at 16mm, I like the small grip, its less fatigue for me. I"ve used arbors, but tend to use the fiber tape in drywalling more often. 3) I use all Flex Coat products myself, its not broke for me, so no need to fix it. Now the other guys that have customers will have a different tone to this. One other thing is your first build, I'd recommend a mudhole blank to build first.

Thanks for the replies, instead of quoting everyone, I'd like to hear from some of you if you went out and got your own and what you think of the carrier/good deal or not, you see this is what I would have to do. I checked out aflac and I can get a percent of my income but its 60 a month and its short term.(3 to 6 months) I checked out statefarm(my insurance) and i can get a mortgage payment coverage long term(3 yrs) for 25 bucks a month, as you see its wildly apart? Once again my work doesn't offer it except they bring in aflac once a year for sign up.

Seen a fellow employee lose on this, he was off for 3 months on a back issue, no pay check. did this at his home not at work. So, Its got me a thinking about disability insurance, this is the only insurance that i do not have. My work doesn't offer it except they do have Aflac come in once a year for sign ups. Any of you people have a comment on the need for this, and or who's a good insurance? I have statefarm and wasn't impressed with what they offered.

Thank ya

Thats awsome to hear, the increase is very good news for me. I'm doing my first micro wraps myself, just set them on tonight, Im gonna cast practice tomorrow before I wrap. You know a pic is needed, ;D 8-)

She asked the obvious cause she was trying to pick ya up : Come on has it been that long ;D ;D

I purchased two MHX blanks, and they will be my first to build on. I will say I went to them due to the feed back, they put up some good numbers, so I wanted to try'em and can't wait for finish product, in between my schedule :

NIcely don Eddie, each time you out do yourself in IMHO, I'm building my first micro guides finally, they look fun to wrap,lol ;D I went with the MHX782

I say YEA!, Vodka is right, Just look at a sample of what we can offer http://www.bassresource.com/bass_fishing_forums/YaBB.pl?num=1266176190 ;D ;D

Left it out in the shed last 30 days. Its flex coat and it isn"t suppose to freeze but, im sure it did. It separated but i shook it up and its back to milky white. doesn't look clumpy, and smells as strong as it should. So ya think its OK, this stuff tuffer than one freeze?

Oxymoron

Man is it that bad still ? I posted a simple comment braggen about BR and they attacked me and posted a bunch of lies about BR.

Nope, never was a bar hopper (thank God), I hated bars, when I drank it was at someones house. Our parties were our parties. Then I grew up and quit Drinken and drugs, now before anyone knocks my comment Im referring to me, I needed to do some growing up

I want to shape my butt end while on a mandrel, I need to come up with a butt plug. I want to match my rubber end so is there any plugs made big enough for the hole? Im guessing the hole size will be any where from .4375 to .625, is there any made big enough for this or will i need to make my own?

Mostly been fine where i shoot at, found a live 22 round embedded in the sole of my boot once so that means someone wasn't watching their ammunition : other than that I did turn in a few guys obviously drinking(they was trying to hide it) they was taking turns sitting on there butt shooting a single shot something to see if the recoil would make them roll off their butt : now this would be a hole other thread

;D cooperation is what it is fellas, It can't be hidden behind honor or my right, i see it in this thread, and unfortunately that is the same reason why we have a identity issue with us gun holders, proudness eventually gets us all, I've had to be humbled many times, and it takes alot out of ya to admit it and learn from it. Some will never cooperate because they take it it to far on what is mine is mine : Don't forget some like to argue just to argue, and whats funny is its all talk as we know, cause I'd like to see big bad my rights's guy be asked if he has a weapon, and see if he refuses to answer

This is always useful, I carry one in my wallet. http://www.handgunlaw.us/documents/USReciprocity.pdf

:-? Say WHUT?? I"ve had a CC license now for the past 20yrs, I have relatives and friends in law enforcement. You better know when to tell a officer of the law you are a legal CC holder with a loaded gun on ya, when he ask to see your I.D. Don't ever take a chance to surprise the officer you have a loaded gun on ya, period. If you are pulled over, you announce that you have a CC and you have the firearm on ya/with ya. Besides they already know from your plates. This is the difference between a ignorant CC holder to a knowledge CC holder. Depends on the state. VA has no notification law. Im not talking law, Im talking smarts, unless its a criminal-then thats what it is then