Everything posted by micahthorlawson
-
For Us KC Area Guys - Fishing Reports
But how can you post your 5 fish limit on instagram if you don't jam all the fish in your livewell when you are fun fishing??? Kind of like throwing a 7 lber in the boat and taking it for a boat ride all day in case you catch some other big ones to take a photo with when you are just out fishing for fun. Stupid. Especially on most of the small lakes around here. I used to love Mound City. Last year a caught a 3 1/2 that had a hole in its mouth so big a 10" shad could swim through. Last couple years it has been down it seems like.
-
For Us KC Area Guys - Fishing Reports
Congrats! Looks like a nice rig!
-
For Us KC Area Guys - Fishing Reports
I have 1996 Nitro F/S. Its 18. 1/2 w/ 115 HP Tracker (mercury) I think the problem you are going to have is finding a fish n ski of any size to fit in the area you want. I have a 3 car garage, but the trailer is too wide to put through the 3rd stall, I have to put it through the double and back it in diagonal. I am considering selling it in the near future and would be asking the low end of your budget if you really are at all interested. I don't have any major complaints with my boat. If i do sell it, I will be replacing it with a Bass boat though. It pulls a tube fine, but is not the best for skiing. I am about 210 pounds and it takes awhile to get on plane pulling me on skis with 3 adults in the boat. It seats 5 comfortably.
-
For Us KC Area Guys - Fishing Reports
Awesome video. Those sprinker blow ups are great. Pulled up to Hillsdale yesterday and my tilt/trim wont work (1996 115 HP Mercury) . The solenoids were clicking but nothing is happening. I already ordered new solenoids to replace and see it that fixes it. From what I read, if one goes bad they both wont work. The tilt/trim motor was replaced last year by BPS so I cannot imagine it being the issue. Thought I would check on here to see if anyone else has had experience. I am no mechanic- so if anyone has anything relatively easy to check let me know. Otherwise I suppose it will be on a wait list to get in the shop.
-
For Us KC Area Guys - Fishing Reports
When this thread started I didn't have a "real" boat, so I cannot speak to Melvern. But Cedar was much better. I think those smaller lakes do go in cycles though. Another thing that hurt Cedar so much was the city opening the south half of the lake to bank fisherman. It used to be that if someone wanted to fish on the south said they had to park at the boat ramp and walk across the dam, that minimized the pressure. Now if you go there on a weekend the bank is absolutely lined with meat fisherman. In the last 3 years I have seen MUTIPLE 3 pound bass in buckets. Like @Bluebasser86 said, they are supposedly closing it to boats when the renovate it, so doesn't matter as much. Definitely are some beasts in there still.
-
For Us KC Area Guys - Fishing Reports
Alright, I need two opinions on some boat issues I am having. First off, I think i need a new fuel line and primer bulb. What brand is the best to replace with? I would like if I could buy locally and not have to wait for shipping. My second issue @RangerDanger & Keith have already given my some useful info. I previously had a 12/24 V TM system, and it appears that their are 2 positive & 2 negative wires running the length of my boat each to an individual battery in the back with an in-line fuse. (No jumper wire at all). When I replaced with a 24V only TM I just re-worked the plug. Now the plug is giving me poor connection so I am going to direct wire. When I do so- Is it ok to use something like this-http://www.basspro.com/Trolling-Motor-Connector-Kit-8Gauge/product/12051808141522/ Or should I literally just splice the wires direct. Also, What circuit breaker should I use?
-
For Us KC Area Guys - Fishing Reports
Awesome fish man! Congrats. Looked like you were in complete shock!
-
For Us KC Area Guys - Fishing Reports
@awohlwend and I did our best to make Brian look good on Saturday since he had a client on board. We succeeded. 4 fish, biggest being 2 pounds on a wart.
-
For Us KC Area Guys - Fishing Reports
Connor- are you thinking about the BFL as a boater?
-
For Us KC Area Guys - Fishing Reports
POST Trip. My boat was already pretty dirty, but it was disgusting afterwards.
-
For Us KC Area Guys - Fishing Reports
@awohlwend and I went to MC Saturday morning. He got a good fish pretty quick on the Dam off a finesse jig (3.75lbs), he can post a picture. Then we went about 3 hours without a bite. I caught a short near the mouth of the creek on a sizzle-fry jerkbait (my 1st on a Sizzle). Water temp was 44-47. There were 5 or 6 boats and a kayak out. They guy on the kayak said he was having a pretty good day and we watched him catch a short on a spinnerbait, other than that we didn't see anyone catch a fish.
-
For Us KC Area Guys - Fishing Reports
Any updates to this? Thinking about going there or MC tomorrow.
-
For Us KC Area Guys - Fishing Reports
@JakeJohnson has had good early spring days out there, not sure about winter though.
-
For Us KC Area Guys - Fishing Reports
Heck ya man!
-
For Us KC Area Guys - Fishing Reports
Awfully hard to beat Sykora or Berhorst on LOZ....
-
For Us KC Area Guys - Fishing Reports
I would not be happy if I paid you to guide and you outfished me, you already do that every other week!
-
For Us KC Area Guys - Fishing Reports
Got the nut off, but had to cut it with a grinder and buggered up the threads of the drive. Hopefully getting a tap n die set to recut the threads this week. I also had to destroy the prop to get it off. Anyone have a recommendation on the Kipawa props? They are about the same as the MG props and I was told they are "better"
-
For Us KC Area Guys - Fishing Reports
I never posted a report from Lake Shawnee--- It was a fun lake, super windy made it tough to stay where the fish were. We caught 10-12 fish, but nothing over 2 lbs. (besides a drum) My boat key broke off into the ignition, and then when we got him we were attempting to remove the prop to TM and broke it. I cannot for the life of me get the nylock nut off the shaft to get the prop off. Anyone had this issue? ( I am replacing with the MG kit once I get it off)
-
For Us KC Area Guys - Fishing Reports
You talked me into it. I'll shoot you a text!
-
For Us KC Area Guys - Fishing Reports
Thinking about taking my dad to lake Shawnee in search of trout. He loves trout fishing. I know some of you have gone out there in the past, is it a local trout permit we would need to buy, or just the state tag? Any tips on where to fish? I am sure I will bass while we are there as well. Thanks!
-
For Us KC Area Guys - Fishing Reports
If I am out for a full, windy day my batteries are usually down to 40-50% (according to my cheap charger). And I bought the biggest ones (31?) at Cabelas/ BPS....
-
For Us KC Area Guys - Fishing Reports
Me too. Except I still don't have a 2 bank charger/24V. Hoping to break down and get one this winter.
-
For Us KC Area Guys - Fishing Reports
Welcome Brad, I am in Olathe as well! Hope to see you on the water sometime!
-
For Us KC Area Guys - Fishing Reports
Why not Stockton?
-
For Us KC Area Guys - Fishing Reports
Saw a chatter bait caught the $100k fish. We had a whole crew down there in the spring, but I don't think ANY of those people went for the fall BBB.