Looking for hook suggestions for this mold, specifically the 3/8oz cavity. Barlow's suggest a couple bronze Eagle Claw hooks but not wanting those. No issues with Eagle Claw if theh have a black platinum version or if someone else makes a good hook for it.

You have a PM

VMC Barbarian hooks work if you can find them.

 

Allen 

Clayton,

    Below is a pic of a Gami 3/0 604 hook in all the cavities. It looks like it will fit if you take out the center hook eye pin in all the cavities.

I just realized on the above mold, you will have to remove some material on the mold around the hook points, otherwise the mold won't close tight. 

3 hours ago, cadman said:

I just realized on the above mold, you will have to remove some material on the mold around the hook points, otherwise the mold won't close tight. 

I saw that on the larger sizes so I got some 3/0 for the 1/4oz and 4/0 for the bigger sizes. Thanks again for your help!

5 hours ago, Bluebasser86 said:

I saw that on the larger sizes so I got some 3/0 for the 1/4oz and 4/0 for the bigger sizes. Thanks again for your help!

?