Hey Guys , Been thinking about putting bocco bearings in my reels are the worth it and are they easy to install Thank you ?

If it matters most of my reel are lews tp and bbi and are buying 4 daiwi svtws reels...

I think you mean Boca. Prefer Hedgehog and ZPi bearings now that I've tried them. Cleaning your bearings first before swapping them out will tell you if you will benefit from new bearings. 

Your reels have spool mounted bearings. You'd need a special tool to remove the pin. In this case I'd recommend having them properly cleaned and lubricated and go from there. 

24 minutes ago, Delaware Valley Tackle said:

Your reels have spool mounted bearings. You'd need a special tool to remove the pin. In this case I'd recommend having them properly cleaned and lubricated and go from there. 

Thanks guys for the reply, I did see that on you tube a special tool to remove pins. starting to think i should have pros do it, Any recommendations on a company who does that ? thanks guys

12 minutes ago, Bobby F said:

Any recommendations on a company who does that ?

http://www.delawarevalleytackle.com/

1 hour ago, J Francho said:

http://www.delawarevalleytackle.com/

Thanks J Francho 

Mike's a good guy, and a friend of mine, as well as a long time sponsor of this site.

1 minute ago, J Francho said:

Mike's a good guy, and a friend of mine, as well as a long time sponsor of this site.

Even Better I will use him .

Hedgehog sells the tool for around 20 dollars and it's easy to do.

2 hours ago, J Francho said:

Mike's a good guy, and a friend of mine, as well as a long time sponsor of this site.

I just sent them a email , thanks 

4 minutes ago, Angry John said:

Hedgehog sells the tool for around 20 dollars and it's easy to do.

angry jon it easy to do , wasn't to sure if i should have them done by pros . am sending them to get cleaned up figure 

if price i right i will have them do it with tune up. 

11 minutes ago, Angry John said:

Hedgehog sells the tool for around 20 dollars and it's easy to do.

I finally got one this year and just did all my reels with it, very easy indeed. 

38 minutes ago, Bobby F said:

I just sent them a email , thanks 

angry jon it easy to do , wasn't to sure if i should have them done by pros . am sending them to get cleaned up figure 

if price i right i will have them do it with tune up. 

Not saying a pro service might not help just a tool guy and a decent one to have around.  

1 hour ago, Angry John said:

Not saying a pro service might not help just a tool guy and a decent one to have around.  

Ok thanks I am actually checking out know your rite it is worth having, Thanks