I got a new trion 30 the other day and its spooled up but whenever i pull line from the drag it sounds like its fraying the line I was wondering if anyone knew what caused this as it is happening in one of my other reels 2

It sounds like it's fraying the line, or it is fraying the line?

It is i can see it and hear it is it because my drag is too tight

Why don’t you post some pictures of line being frayed from just pull out from reel. I have seen you post a few time about this issue. Sometime described is not as accurate.

Nearly converted the video to show you but i can hear a pop like sound when i comes off the reel

is this a problem or am I being paranoid and got a bad spool

How tight is your drag?

Tom

Tight but enough so i can pull it out with some force

Looking for video file converter

All a drag does is provide limited slip under pressure. Line can only fray from contact with a rough surface: a chipped guide ring, a dinged spool lip, retrieve through cover like wood, rock and worst of all zebra mussels. 

I guess I know what he meant by “Fraying”. it just the sound of line being pull out in tight drag where it crushed each other. 
You can just upload to YouTube and link to that video here

What kind of line and how tight did you spool it? Loosely spooled mono or hybrid and a tight drag and you will hear a crackly crunchy sound as you pull as the loops tighten and moved around loops under them on the spool.  Have you used the reel yet?

Made like 5-10 casts

I also found the spool to be bad and am contacting bass pro

Line spool

Oh shoot your right

 

This is how i spool line

It seems like you are so proud of that line spooling station. I saw you posted this video a couple time. I wouldn’t say it is a gimmick, but that guy might also be sponsored by the company.

There are two most recommended way of spooling spinning reel. From tackle shop which line goes in straight but cast out twisted, or behind running boat which line goes in twisted but cast out straight. No matter what both way will not stop line twisted overtime. you will have to manage or clear twisted every once awhile. A spinning reel with good line roller bearing would help line twisted more than that tool, my .02.

I spool line just like baitcaster no tool need but line come out from under spool instead of all top. This way I can apply pressure across the whole length of spooling (I’m not sure how you keep pressure on that tool)

 

 

I really like it what he says make since have had less tangles but am beginning to think maybe its not putting enough tension on it so i have to do that myself in which this is the first time I have had a problem 

1 hour ago, Esox pro said:

I don’t see any frayed on your line but I see a couple of loose loop on your spool. It is not fraying just crushing sound when you pull line from tight drag and line try to dig in. There is nothing wrong with your line or spool either I believe.

Good news and bad news i took off all the line and tried to respool it

bad news is chunk of it gone from knot

6 minutes ago, Esox pro said:

Good news and bad news i took off all the line and tried to respool it

bad news is chunk of it gone from knot

That also show, the spooling station is no good. It still spool in with twisted line unlike what he claimed.

As side note never strip the line off spinning reel without tension. You either walk it off on water/grass or tie one end to station objects. Once the twisted line bundle up, it will be hard to fix.

I just put my reel in table on deck open bail and walk to the end of my backyard with the line and this is the first time I have had a problem  

To be fair the line had all sorts of nicks which always form knots

To be 100% honest if your line is kinked that is where the tangles cone from as the line will want to be in a loop like possible and is where all of my tangles come from 

This thread hurts my head.

2 minutes ago, VolFan said:

This thread hurts my head.

Am I getting sued

34 minutes ago, VolFan said:

This thread hurts my head.

It's almost over...

The easy answer is to simply return the reel for replacement.

 Well luckily reel wasn’t problem 

It turned out to be bad batch and wasnt on tightly