So ready for spring. Cover should be here soon! Only took three years to find one that's trailerable.image.jpg

Nice Raider btw     Care to share where you found the trailerable cover for your 10e??

Them tan colored one's are so sick looking. Never seen one in person.

I found it at boatcoversdirect.com. Price isn't to bad. As far as transducer goes, I haven't noticed anything odd. It's been there for two, three years.

I found it at boatcoversdirect.com. Price isn't to bad. As far as transducer goes, I haven't noticed anything odd. It's been there for two, three years.

Do you have a unit with DSI?

 

Thanks for the link

Yes. Lowrance elite 7 DSI

Had my 10e for about a week. Finally getting things under way. Found a jet ski trailer to customize, went to Academy and bought several unique items all made by attwood. Led clamping spotlight and clamping running lights were among the coolest. But has anyone have experience with putting screws or rivets on these boats? Any problems screws pulling out? The rivets for kayaks and small boats seem like they'd work.

Got my cover today! Seems well made. Good tight fit!

I just recently purchased a pelican intruder. Does anyone have any advice on attaching swivel seats the the bench seats?

 

Thanks,

John

I just recently purchased a pelican intruder. Does anyone have any advice on attaching swivel seats the the bench seats?

Thanks,

John

there is john boat seat clamps that would probably work. But from what I've heard, you aren't really able to lean back too hard.

I have a pelican bass raider 8'. I would really like to build a casting deck on the front or something i can store tackle under. Also, my troller motor and battery are in the back and its so unlevel and if i sit in the front, i cant reach the trolling motor. so is there like an extension wire i can buy to extend from the battery to the trolling motor. thanks

 

 

 

 I have this exact boat. I just purchased a 4x8 sheet of treated 3/4" plywood, as well as a 5 foot roll of 6' grey outdoor carpet from Lowe's. I also bought a    pedestal seat mount from Walmart. I'm going to build two small platforms for casting decks as well as removing the fold down plasic seats from the brackets they are attached to and mounting them on the pedestals so one has room to rotate 360 degrees if need be. I think this would make the boat night and day better to fish out of. 

Can anyone confirm that this seat will work?

 

http://www.amazon.com/dp/B0000AXXAN/ref=wl_it_dp_o_pd_nS_ttl?_encoding=UTF8&colid=F28A9MN6M6LJ&coliid=I10VBSYZ7EUYPT&psc=1

Yes, all you do is unscrew the plastic seat and install that one.

Yes, all you do is unscrew the plastic seat and install that one.

 

Great - thanks!  I ordered a camo one

Been out 7 times since I bought the pelican 10e. I paid more for a power pole micro anchor than I did the boat and I strongly recommend to anyone. I cannot imagine fishing without it. My friends kinda laugh when they see it but they see me out on the main lake when wind is blowing 28mph and I'm sitting perfectly still or when I'm trying to boat a fish I can just press the button and not worry about becoming blown on the shore or on top of stumps. No way associated with power pole and do not receive money or discounts from them. Just grateful for mine.

Been out 7 times since I bought the pelican 10e. I paid more for a power pole micro anchor than I did the boat and I strongly recommend to anyone. I cannot imagine fishing without it. My friends kinda laugh when they see it but they see me out on the main lake when wind is blowing 28mph and I'm sitting perfectly still or when I'm trying to boat a fish I can just press the button and not worry about becoming blown on the shore or on top of stumps. No way associated with power pole and do not receive money or discounts from them. Just grateful for mine.

. Got any pics? Was looking at a talon for mine but, after seeing the actual size and weight, would of been a bit much!

Yeah I'm in town right now headed to the lake. I'll take some when I get there. I think the whole unit weighs 20lbs.

Yeah I'm in town right now headed to the lake. I'll take some when I get there. I think the whole unit weighs 20lbs.

cool would like to see that set up too.  

The micro weighs I think seven pounds just the unit. The pole probably weighs 5 or so pounds. Its virtually no extra weight and locks down my 15 foot Jon boat with a big 4 stroke on the back. The nice part is I can order the clamp bracket and slap it onto my perch when I use that within less than a minute.

I tried to post pictures of em but it says file is too big. They are extremely small and I have the clamp mount attached to mine. Literally takes 15 seconds to attach and slide the pole in.

Does anyone know what size drain plug will fit in the baby bass basshunter? When I got mine it didnt come with a plug.

Twins!

Just purchased a beat up 9 foot older faded, sun cracked, cracked hull, I think it's a Pond Prowler floating turd. What I need is a seat bracket. The one I have is 26" across and fits in the grooves nice and snug. If anyone knows where I can get another for a good deal I would much appreciate it. The boat is kept on a private pond and I don't worry too much about what she looks like as long as she floats, I only paid $30 for her. I leave the boat at the pond so others can use it and enjoy the great bass fishing. So as you can tell I don't want to invest a lot of money on this one but would like another seat. Any ideas or information on where I could get one of these brackets? I have seen the ones at Bass Pro Shops for $39 plus $8 plus shipping. I don't wish to spend that much on this boat. Thanks, I have enjoyed the threads and photos on these boats. You guys have some ingenuity going.

Hawgmaster: When I needed a plug for my floating turd, I measured across the ID of the plug opening and then went to my local boat supply shop and bought a 5/8" plug. They usually design these plugs for live wells and such. I removed the whole assembly and took it in to be sure. They showed me how to adjust it and it fit like a glove.

So the time has come. I just picked up a Gheenoe and I have too many boats. My garage is getting crowded and the Bass Raider is being neglected so I will be finding a new home for her soon. She was a great first boat and I will miss her. If anyone is in SW Florida and interested hit me up because she will be going on craigslist after the weekend. 

 

Has any one tried a Power-Pole Micro Anchor on their Bass Raider 10E?