Everything posted by Angry John
-
Z man pop shads
Yeah not fond of that rod and what I plan to change.
-
Jig & Worms Casting Rod
I never jumped on the Loomis train but I did get a taste of megabass. The scv Croix blanks are just about as good as it gets and is considered top tier. If your looking high end the Phoenix k2 is amazing what time I got to fish one. Not one who likes recoils and that kinda turned me off the nrx at that time. Technically Loomis is now shimano. Just does not float my boat but that's not saying there not amazing.
-
Z man pop shads
So I tried this lure out today and initial indications are good but my setup was bad. Wrong hook or wrong rod. I used a dobyns 743dx with 30 lb braid on an sv-103 with a 4/0 ewg gammy. The rod is to slow and moderate I feel, and I thought the braid would make it good. I will swap out to a 70mhf st Croix legend with all other things the same and see if that does the trick. I got 4 bites fairly quickly and tried to set the hook. Never connected and the lure just kept flying back at me. Worked well on bass busting bait right on shore and rigged weedless it's nice like a frog because you just throw it in there and go. I did land a few after I swapped to my popper with st-41 trebles. Nothing escapes that lure.
-
Having issues with Spro popping frog.
Bend up and out the hooks just a little. This is also the only technique that i only use braid. Hope that helps
-
To All My Memphis Pond Hoppers!
I feel like it's getting later on in the season and these pond fish see an insane amount of pressure. Tons of natural food is also available as I see tons of minnows in these ponds now. Might be time to change tactics and try and find an approach that is not as common. Drops hot maybe?
-
Z man pop shads
I have a pack of three that I got to try out this year but have not been in the area to use them. Going on a tourney to reel foot on Sunday and plan to give them a try. Lots of vegetation on that lake so I think they may get used.
-
Treble vs round bend treble
Basically round bend for jerkbaits and things that are slapped a lot like top waters and ewg''s on things that are engulfed like rattle traps. I use a cheater hook the st-41 which is a round bend with the tips just slightly turned in. Tons of basic rules but everyone has a favorite and an exception to every guideline.
-
Monstrosity
Coming to the back of a bass pro boat sooner than you can type KVD.
-
Advice on Avid X Rod for Shimano Stradic Ci4+
At first I was going to recommend the 68mxf Thai I have and got for my son. It works well for 1/8 jigs with small trailers weightless worms and is a handy rod for skipping docks. If you do a lot of open water fishing and don't use a bait caster then the mhf might be a better all around choice considering your now talking pike and a larger reel.
-
Changes In Equipment Just For The People Who Must Have The Latest ?
Trike the 3 sea shells on demolition man.
-
Scrimless NFC
We all have to operate on an ethic and this is a good one to have. Great info.
-
Yanny or Laurel?
I hear there are treatments for being basic which includes more fishing and feeding the bait monkey.
-
School Me On Top Water Poppers ?
When there old and can't handle punkers any more
-
School Me On Top Water Poppers ?
Never fished either of those two but my cheap bass pro 2$ popper catches a ton of fish. The most inportant part in my opinion is hooks. The st-41s cost more than the popper but it is used more than my pop max because it gets the job done. Poppers that you can also walk is the most important part of the bait. Not all will.
-
To All My Memphis Pond Hoppers!
The popper works for me any time it's dark. Day worker so I dont get to try that morning fishing often.
-
JDM Zillion TW HLC
This is also who I order form. Great service and price, shipping time sux.
-
To All My Memphis Pond Hoppers!
Go at 730 pm and work a frog or popper along the bank and it should catch you at least one. It has worked extremely well for me the last 7 days and I get out almost every night for at least an hour. The zoom 6" lizard in 420 working well on a Carolina rig.
-
JDM Zillion TW HLC
The only other issue I have seen is part 59 pops out of the cap and the cap is pinching the spring between the Cap and spring. If this is not the case, change out part 60 or one of the side plates is loose.
-
Minimum Hook Supply needed for soft plastics?
One other thing I was taught but not verified is the Guage of the wire increases a lot between 2/0 and 3/0 in a few hook series. I seemed to need less power to get a good Hooksett in a 5" worm when I started with spinning rods and I was set in my ways by the time I got into casting.
-
Should I use 7.1 or 7.3 ft rod for hollow bodied frogs?
I doubt that the expense could be justified. I use a 735 because of handle length not the rod. Two of the favored enthusiast rods are the perfect pitch which is 7'2" and the xbd frog rod which is 7'4". A lot of fans of the dobyns champion 735. Your in the right area as long as the action works for you.
-
JDM Zillion TW HLC
Part 61
-
How to minimize gut (deep) hooks? Lure type; hook set timing
Point blank it's going to happen. It happens most often with worms and baits at rest on slack line. Any fish I would feel bad about has a mouth big enough to use the hook turning method. If it is to much to handle fish swim baits over 4 Oz and it's never an issue.
-
JDM Zillion TW HLC
Did the spring plate in the cast control cap come out?
-
Braided line with aluminum oxide inserts?
Not a big problem, something I would not worry about.
-
Minimum Hook Supply needed for soft plastics?
Some people use odd and I go even as 2/0 is my most used hook followed by 4/0. For punching I could go 4/0 only. The gammy ewg is what I but and the mustad grip pin punching hook. Owner 3/0 weighted swim bait hooks and 2/0 weedless hoOKs for wacky. Everything else is specialty low volume stuff, like 10/0 beast which you don't need 30 backups.