Everything posted by Mjmj
-
Worm bag/binder input
Bass pro http://www.basspro.com/shop/en/bass-pro-shops-extreme-worm-binders-large Check out the double binder bag. I have 2 and they store all my plastics
-
Set ups
I don't have any experience with any FF , but the helix 9 mega . I can tell you, that I use the autochart feature as much, if not more than my side imaging. I fish alot of lakes with weeds and use this feature to fish breaks and depth.
-
Cronarch 150 vs Curado K
Ok. I spent the last few hours researching and decided the curado k is not the reel to use for pitching. Now I need to decide between the curado 70 and the mgl
-
Cronarch 150 vs Curado K
Overall. The cronarch is low profile with 8:1 gears. Where as the Curado is 8:5. Just want to know, on paper, which would be the better of the 2 for me.
-
Cronarch 150 vs Curado K
I am looking to buy a new reel for pitching grass. Which is the better reel for this?
-
Trolling Motor 12v to 24v
Your on the right track. Get rid of the battery selector ( no need for I ). 50 amp is the correct breaker. A 4 or 6 gauge wire should work between the batteries. I'm assuming you have 2 wires running from your trolling motor. If you do, you can use the same plug. MAKE SURE when you wire the plug, that you have neg to neg and positive to positive when the plugs are connected. Use this page (https://www.minnkotamotors.com/Battery-Selection-Rigging/) to determine what size wire to use from the battery to the trolling motor. Hope this helps
-
Will smartstrike show all lakemaster maps
Thank everyone for all the help. Looks like I'm going to buy a smart strike card
-
Will smartstrike show all lakemaster maps
I am trying to decide between a smartstrike card and a lakemaster card. I saw the same lake lists for both products and was wondering if the smartstrike showed all the lakemaster lakes. I know you need to have a hd map to use the smartstrike, but will the smartstrike card still show the none hd lakes on my helix?
-
Upgrade GPS/Fish Finder?
Lucky you. Don't quote me, but I think there are only 14 lakes mapped in PA..
-
Upgrade GPS/Fish Finder?
Not sure what it's like in MD, but in PA there are very few lakes that have contour maps. I bought a helix 9 si gn2 which has the ability to make my own maps. This has doubled my catches.
-
New Guy from PA
Where u launch your boat at Kaercher, about 50 yards out there is an under water fishbowl (previously an old farm pond) Try the drop offs. Usually good for a fish or two
-
Try this on for size
Who is offering the $30 off. I been wanting to buy one
-
New Guy from PA
Hey. Where in SE PA. I live near Cabela's. Welcome
-
Helix si 9 either net to a 778c
Thank you
-
Helix si 9 either net to a 778c
Hi. I just bought a Helix 9 si. And I had a 778c humminbird given to me. If I run a either net cable between them, do I have to mount the transducer for the 778c?
-
Ned rig with a baitcaster
I want to thank everyone for your replies. I have used spinning rods for my neds. The whole reason I want to use a baitcaster ( even though it's gonna cost slot more) is for the accuracy when I cast. I Don't want to stir up any debates, I'm just way more accurate with a baitcaster!
-
Ned rig with a baitcaster
Is it possible to throw a Ned rig with a baitcaster? If so what rod and reel would be suitable for this?
-
Ned rig with a baitcaster
Is it possible to throw a Ned rig with a baitcaster? If so what rod and reel would be suitable for this?
-
Installing a USB port
Nice job. Is that the one from amazon? If it is, my buddy just ordered one too. He asked me to borrow a hole saw for it and I forgot what size the saw needed to be.
-
Installing a USB port
Here is the link https://www.amazon.com/Marine-Grade-Socket-Cigarette-Lighter/dp/B0112KJ09S/ref=sr_1_fkmr1_1?ie=UTF8&qid=1486758803&sr=8-1-fkmr1&keywords=us+solid+marine+grade+dual I used 12 AWG marine grade wire http://www.bestboatwire.com/marine-wire/marine-primary-wire/12-awg-primary-wire Not sure how many feet you have to run the wire, but I used 12awg because of the amp draw of the DC outlet. You will also need 2 12-10 AWG HEAT SHRINK QUICK DISCONNECT WIRE TERMINAL FEMALE Like I said it was fairly easy to install. I used a hole saw for the outlets and the rest was pretty simple. Sorry I tend to ramble on. I'll be happy to help if you have any more questions
-
Installing a USB port
I bought 2 usb/DC outlets off of Amazon. They are waterproof and easy to install. I ran them right to my fuse panel. That was about 2 years ago and have not had any issues.
-
What a rack
I saw his pic and googled it. Next year when I replace my deck I'm going to add a few of these to my boat!
-
What a rack
Here it is http://www.mdsspecialties.com/marine-products.html