So I’ve been confused for the longest time on lure weights. I do know that the higher number for crankbaits Example- 3/8 is lighter than the smaller numbers 1/2 which is heavier. But when it comes to jigs I didn’t realize the smaller number is heavier. So my rod is rated at 3/4-1/4oz. With jigs do I just go backwards so the heaviest my rod can handle with a jig is a 3/4oz and the lightest it can handle is a 1/4oz jig? 

This took me a bit to decode but...

 

1/2 = 4/8 so yes, it's heavier than a 3/8 (fractions)

 

And yes, the lightest rating for that rod is 1/4 (2/8) and the heaviest is 3/4 (6/8)

I'm not sure why they listed it backwards but yes, it just means your rods ideal lure range is 1/4-3/4oz. You may be able to go slightly one way or the other of that range, but don't push it too far. 

Now if I want to use bullet weights I can use 1/4,3/8,1/2 and 3/4oz correct?

11 minutes ago, Jonny15678 said:

Now if I want to use bullet weights I can use 1/4,3/8,1/2 and 3/4oz correct?

And everything in between with a little leeway.  3/16 to 7/8 isn't out of the question though I'd probably not go for the 7/8 on that rod personally...I'd pull out my heavy rod - 3/8 to 1.5.

Made this for a friend.  Others might find it useful in the future.

 

1/16

1/8

3/16

1/4

5/16

3/8

7/16

1/2

9/16

5/8

11/16

3/4

13/16

7/8

15/16

1 oz

Thanks everyone I understand it all now.

I've seen these questions here before. Stretch out a tape measure. Each increment fraction is heavier going left to right. Sounds like your rod is rated 1/4 to 3/4. These are suggested weights for your rod. Don't go over 3/4 too much and you should be fine. A tape measure can help folks get a visual on fractions.

Keep in mind, if you use a 3/4 oz bullet weight your probably pretty close to 1oz after you add the weight of hook and lure. Some of those plastics can be pretty heavy. 

32 minutes ago, Lead Head said:

Keep in mind, if you use a 3/4 oz bullet weight your probably pretty close to 1oz after you add the weight of hook and lure. Some of those plastics can be pretty heavy. 

Good point that sometimes gets overlooked. 

 

 

 

 

Mike

4 hours ago, Mobasser said:

I've seen these questions here before. Stretch out a tape measure. Each increment fraction is heavier going left to right. Sounds like your rod is rated 1/4 to 3/4. These are suggested weights for your rod. Don't go over 3/4 too much and you should be fine. A tape measure can help folks get a visual on fractions.

Thanks

8 hours ago, Lead Head said:

Keep in mind, if you use a 3/4 oz bullet weight your probably pretty close to 1oz after you add the weight of hook and lure. Some of those plastics can be pretty heavy. 

 

It's the same with jigs ?

 

Ya got 3/4 oz head, 5/0 hook, skirt, rubber band or wire, weedguard. & Trailer.

14 hours ago, Revival said:

Made this for a friend.  Others might find it useful in the future.

 

1/16

1/8

3/16

1/4

5/16

3/8

7/16

1/2

9/16

5/8

11/16

3/4

13/16

7/8

15/16

1 oz

All the people who are bad at fractions have liked your post