The handle nut on my zillion appears to be washed out (stripped). Does anyone know where to get one ?

 

part number 6G793310

 

tackle trap doesn’t seem to list it specifically 

Have you called Daiwa?  (562)375-6800

It should just be any old M8 nut. 

 

On 7/13/2022 at 8:46 AM, FishTank said:

Have you called Daiwa?  (562)375-6800

They don't have any...

Tried Plat?

30 minutes ago, Bandersnatch said:

They don't have any...

Bummer.

 

Plat, maybe, but it would be JDM part number.

 

 

Amazon or the tackle trap.  Daiwa is basically the industry standard when it comes to handle nuts.  Everything from other daiwa nuts to random chinease reels use the name size and threading.  Just make sure you order the correct one for what side the handle is on.  The tackle trap has right hand daiwa nuts in stock.  Get a lock plate too and ditch that awful plastic thing.

On 7/13/2022 at 4:23 AM, Bandersnatch said:

The handle nut on my zillion appears to be washed out (stripped). Does anyone know where to get one ?

 

part number 6G793310

 

tackle trap doesn’t seem to list it specifically 

Every single handle nut from the TackleTrap fits it. They aren't any special nut. Under Daiwa parts, handle nuts, just pick the color and orientation you want. Every reel that utlizes this non bolt in nut is the same(10mm) from the old TDZ, OG Zillion, Tatulas, SS SV, zillions, alphas, etc. All my Zillion Gs have them. I have a ton of spares because of how easily they strip and people that send me theirs for the same thing. People tend to over tighten them when just a click past snug is sufficient. when removing, go as low as possible to back it off. 

Hedgehog sells KDW titanium handle nuts, which are here to stay. 

the Daiwa/Abu/Lew's thread is 8 mm, and the driver size is 10 mm

Note thread pitch is reversed for RH/LH. 

The stock Zillion handle nut is anodized aluminum, and Lew's are plastic.  

Send me a pm if you want one I removed (RH).  Have more than a half-dozen M8 RH handle nuts in reel boxes around here. 

It's a standard reel nut of 10mm outside dia, and 8mm thread. You can order from Daiwa.