Sharkbite

Yea the trion cranking reel is great. I can't get enough of it and brand new are $100 with warrenty can't beat that.

Yea me too. I just oiled were the manual said to and it's good as new now.

OK mook I'll leave it alone

Were do I get these schematics?

O really so I shouldn't attempt to take it apart? I think at the end of next year the Pfleuger Mooks are sending all the reels out together. So I'll wait till then for my spinning reels to get cleaned. For now I'll follow the manual except the part were it says to rince with water.

hey guys I just learned how to breakdown and clean my BC reels. I have a few spinning reels I need to do though. I read the manual for my president and it said to rince with fresh water then re oil and lube. Is this correct? It also says to just do the peices exsposed nothing about taking it apart. Is this what you guys do? If any one has a diagram and/or site I would love it Thanks,Sharkbite

Did you get the Topo maps and overlays when you down loaded the program. I didn't and it won't allow me to install it in the plug in section.

Hey guys after watching the the NASA World Wind I down loaded it but I can't figure out how to use it. The tool bar dosn't even have the Urthos in it so I can't veiw crap is Google easier to use then this? Can anyone help me learn this?

I just joined as well I am getting a free tackle bag and it was only $1.40 per issue. Great deal.

dam wat a deal the you couldn't buy that motor for what you the combo for

Hey Mook glad to see you back in action. I heard your voice last night and was like " it must suck getting old" LMAO : But I also have to front motor to put on yet. The front motor is alot stronger too. I hope the winter goes fast

ok I probibly won't be till spring I still need the hitch on my car

I am now getting ready to mount the front motor and am kind of stuck. I don't want to put any holes in the metal and I have about 30'' from th motor to pedal. I want to use it while in the front seat. So if anyone has done the samething could you post a pic and exsplane how Thanx

Before

I used a pick up truck bed liner from auto zone on the inside of the boat. It provides grip when wet and it very durable. It also gave me a secondary seal.I then used All purpose enamel on all the new wood. I had to add support under the seats so the wood won't crack. I plan on making it a storage area under the seats when I install the floor.

Full Veiw

I put on the seats and finished the inside today.

i can'tfind this for NJ do you think it would be ok if I ordered it from PA even though I live in NJ and place it on my boat. I never heard of a law against that. I am sure they all say the same thing rite?

I am almost finished restoring my boat. I am about to remount the transom wood and my Capacity plate is really worn, rusted and dented. How do I go about getting a new one? Is there a web site or number?

Dam nice work I would love to do something liike that but I am worried that it'll tip b/c my bottom is round not flat.

Looks great dude. Good work

Hey this Rhino liner makes it quit too?

I think I am going to hold off before I add any more weight to the boat. I want to see how it operates as of now with the seats and new wood and epoxy. when you add wood to build a deck does this change your capcity load?

Do you want to know what I got the boat for? To paint it I spent $50 on the epoxy, $12 on primer, $23 on brown speay paint $15 on tape and wire drill brushes for sanding. I bought the boat for $100 and the trailer was $250. I also got a used foot Cont. Minn Kota Trolling Motor for $50 and a new trolling motor for a $90. I have the pedastools for the seats. I need to get the seats now I found some for $10 a BPS and I need the swivels. I also need to replace all the wood in the boat and I need new trailer tail lights.

Yea dude you are rite. Thanks I couldn't of done it with out you.