QUAKEnSHAKE

Could be the brake tabs rubbing the brake drum. I had this noise on my BB1 Pro with similar brake system as your reel. I oiled the drum lightly but noise still there but you can try it see if it helps. I did notice the NEW BB1 Pro has QUIET CAST feature so this tells me it was a common problem. Add a drop of oil to the spool bearing as well. or take them out clean real well then oil. See video

Braid behaves way better than Fluoro on a baitcaster and no spray needed. Your 70 will easily toss a 2.75" TRD with 1/20 jighead ned rig.

Additions grams ounces JACKALL RHYTHM WAVE 2.8" 2.513 0.09965 KALINS TUBE 3.5" 5.515 0.19455 MOLIX RA SHAD 3.8" 6.286 0.22175 REINS C-POD 4" 9.509 0.33545 YUM VIBRA KING TUBE 4.25" 10.138 0.35760 ZMAN PADDLERZ 5" 9.0114 0.31795 MOLIX SCULPO crankbait 1/2 12.347 0.43550

Opposite depth about 2fow same 5" BAMA BUG wacky rigged unweighted you can see in the background the logs I tossed to where I hooked in to it.

Wacky rigged out 100+ feet 25fow unweighted

Oh senkos catch fish 5" BAMA BUG

Bass will take a deadsticked senko even after a good ten minutes of non-movement. Ill toss one out and cast with another set-up in the meantime.

Okuma Helios 7' MH/F Quantum Smoke 7' M/F

My SV105P is mostly used for Keitech Swing Impact Fat paddle tails. Like to be able to slowly cross the bottom letting the super wobble/wiggle action this lure has do its magic.

in-line spinners

I played with Hg when I was around 10yo this is my selfie I just took

Have you bought some MEND-IT if not do so it will save you $$$$ on those senkos.

A-rig and drop shot.

DIGITAKA & free shipping

I have SV105 and a measured 200' of 16# Sniper FC fills it completely no backing.

I have read quite often from people stating don't judge a reel by the display model. My take on this is if a reel can't hold up to the relatively light abuse it gets inside a store it can't handle the work it's going to get out in the elements.

The guides. The guides are huge on my ML LTB they dont need to be that big. My MH7'6" rod guides arent as big and they arent micro either.

They were $128 and most likely will be again. So yeah a used one will have to be around 80-90 even then I would rather buy new at $128. I dont sell my stuff so resale doesnt matter to me at all. The thing is I feel the 70 is very very good the reason I returned my Chronarch MGL and bought another 70. The K just doesnt scream at me as being much better. The Bantam MGL might get the nod at that weight range for full Aluminum construction.

I dont think its worth the difference in price. I have ML Avid spinning & ML TLB casting. Dont think I would by another LTB rod unless its under $100 new. Save $$ and get Avid or splurge $$$ for Elite.

Like a niche/specialized catecory. A person might toss ned rigs, 1/8 pond magic or micro spinnerbaits, 2"-3" paddle tails anything in that weigh range. Quite a few casting reels made now to match with a light powered rod. I don't have quite that light 1/16 rated but I have 1/8 rated 7'6" casting for used for the above lures.

That might be your way in with a judge could be the easement to property

This place has the red and grey for Citica 200E cant find green https://www.ereplacementparts.com/shimano-ci200e-lowprofile-baitcasting-citica-parts-c-200301_200303_281556.html From the picture yeah they are short and squared off not like other taller round brake collars.

Keitech swing impact fat paddle tails bluegill flash color with 1\4 ounce swimbait jighead. Can be fished top middle bottom steady retrieve. Good use as well would be just letting it fall producing its own action many hits happen this way.

https://www.hepworthlegal.com/2015/02/land-landlocked-can-get-access/

No I'm holding both right now if any difference it is like 1-2 millimeters. I grabbed my calipers and palm sideplates basically same. Front to back length same. Thumb bar maybe a mm higher on 70. Minute differences overall. I much prefer the newest brake system the 70 has over the vbs of the 50.