Siebert Outdoors

I sell them per each so you can buy exactly what you need.

I will refund the shipping to you. Unfortunately, this isn't something I can program. Thank you.

In celebration of the 4th of July, we are launching a 10% off everything sale. Use promo code FREEDOM to redeem. Sale runs until July 7 2018. Also, if you purchase 4 bags of soft plastics or more of any mix Strike King, Rage, Keitech, Mega Strike, Moaner, Owner, Zman during the sale I will refund the shipping cost.

They watched Wicked Tuna.

Hello Kevin Here is the break down of the differences in the Brush heads. The different series are based on a different hook. The actual head on my Brush jigs are the same excluding the Dredge. The dredge 1/2 has a 1/8 weedguard and the others are 5/32. When you jump into the Mata jigs I take a jig and add living rubber to the silicone jig giving it more bulk and profile. extreme mata has living rubber added grid iron mata has living rubber added dredge mata has living rubber added flukemaster Pro has heavy living rubber added flukemaster brush Same as a Grid Iron Brush head but in Flukemaster colors extreme brush Made with a Trokar Hook grid iron brush Made with an Owner XXX strong hook enraged series Gamakatsu hook Enraged Brand. Not my design. dredge brush Made with an Owner Deep Throat Hook and Supreme Brush made with a Mustad Ultra Point Hook

Its big. I made it for big worms and craws. Its great for ledges. One of our customers use them in big brush flipping a 6 1/4" craw.

We offer the Megalodon but it is not tungsten. 1/2 or 5/8 with a 8/0 hook. https://www.siebertoutdoors.com/Megalodon-Shaky-Head-1628.htm

I have several Legend Elites. These are by far my favorite rods I have fished to date.

No lies here. I say I'm going fishing. Wanna go?

Hey Jbrew73. That is a Dredge dock rocker in blue craw. Thank you. Ill be home tomorrow and then start back building tomorrow evening and Monday. We have caught a bunch of smallies and walleye.

Today was aloy better. Roughly 50-60 smallies and a big walleye. Most of the snallies were 3.5-4.5lbs. biggest so far 4.67

Thank you all for such kindness and your support!

We caught about 30 smallies, small lm, 5 walleye, small musky and a pike so far. That cold front slowed them down. Tomorrow im going again. With the warm up it should be good. Biggest smallie is about 4.5 so far.

IMO its the best hook for a senko. I ise a 4/0 for the 5" senko

Thank you MickD. At 57 degrees they should be in my honey hole if its sunny which it looks like it will be. I'll probably launch out of 9 mile. But I sometimes run down to the Detroit river and fish the river back. Good walleye in the river. We will see what happens.

I'll be there the same time. Red Stratos that says Siebert Outdoors on the side of it.

I'm headed there Saturday. Does anyone have any current intel?

Wow. Awesome fish. Congratulations

If all goes right I will be able to meet up with you guys Saturday evening. I will be leaving to Tablerock on Saturday morning.

I use a 4/0 Owner Twist Lock Flippin hook.

It will work but like iabass said its 2d only. I have a fortrex with the US2. I unhooked it and put a total scan and 9" carbon on the front. 12" on the console with 3d Its awesome. One thing with the total scan. If the boat is anchored or sitting still the structure scan will not work correctly until you move. This is one of the pics I took from the total scan. It also the crappiest return I had when I had my phone out to snap it. This is from a total scan. Normally the returns are awesome. I hope to get more tomorrow.

You also need the starter kit.

You only need one Point one. If you fish structure and off shore the point 1 is a must! Its a huge upgrade to your graph. Anyway, it must be run on a NMEA network. What you will need is the Point 1 and an extra t connector. At least I did. The units must be attached to the top of the T and the connectors must be connected together or by another NMEA wire with a dead end on any unused end. This video from Lowrance will explain it. The best suggestion I can give you is lay it all out on the deck of the boat and make sure everything hooks up correctly with all the parts then install.

Thank you guys! We have a bunch more Zman on the way. We have just about sold out in the last couple weeks.

Our newest product! This is a ledge fisherman's shaky head! It also has many other key uses. The Megalodon Shaky Head is built on a Mustad Ultra Point 8/0 hook. The Megalodon is make for fishing big baits like the Rage Lobster, big worms, or any other big bait for ledge fishing or any other situation that you need a big bait and a big hook for big fish. The head is finished off with a tough coat of powder paint for durability and a stainless coil for keeping your bait attached. Weights are 1/2 or 5/8. https://www.siebertoutdoors.com/Megalodon-Shaky-Head-1628.htm