Skip to content

WIGuide

Super User
  • Joined

  • Last visited

Everything posted by WIGuide

  1. You could also check ebay for an old 4 blade prop that fits. 4 very short blades do amazing in grass, but not tons of power. That should slow you down enough, but leave you with enough power to move. Not to mention it's cheaper and easier than messing with the electronics.
  2. I thought I would, but I don't. I haven't looked recently, but I wanted to find a good journal app, but the ones I found sucked. I had a few other fishing apps for information and whatnot, but they never got opened so I just ended up deleting them. Also, not a fan of sharing waypoints with other people.
  3. You'll have to measure the diameter of the lower end of your trolling motor. It should fit the same prop as the new ones do, but I could be wrong. It sounds like you're missing a part though. There should be a collar on the shaft above the mount that you slide down to ride on top of the bracket.
  4. I throw most of my squarebills on a 7'2" M/M St. Croix LTB with an older 7.1:1 Johnny Morris Elite reel spooled up with 12 lb Berkley 100% Fluorocarbon.
  5. I use a 6'6" M/F Legend Xtreme for mine. I throw mostly 5" Cane Thumpers.
  6. With boats getting bigger and bigger, they need more power to push them. Also, as mentioned already is the time management aspect for tournament anglers. If you put a smaller motor on one of these boats, they wouldn't perform all that well. For instance, one of my friends has a big Lund Pro V because he bass fishes but he also lives up by Lake Superior so he's out there quite often. When he bought his boat he wanted a 4 stroke and the biggest available at the time was a Honda 130 so that's what he got. His boat is rated for either a 200 or 225. His hole shot is virtually nonexistent. The time to plane out probably would be better labeled in minutes than seconds.
  7. That really sucks! I'm surprised everything else looks as good as it does though considering they snapped the motor clean off.
  8. Just pull them apart.
  9. If there's a lot of brush/trees on the bank where you fish the 6' might be a good option, but if there's not I'd go with a 6'6". For an all purpose rod, you'll have to look at the weight of the baits you throw the most frequently and pick the rod who's recommended lure weight matches up the best. I'd probably pick up a medium/fast but I throw lighter stuff in general.
  10. I don't have any experience, but it should hold you just fine. It's rated at 325 lb capacity. A battery, tm, and gear would have to be right around 100 lbs or less, but that shouldn't be that big of a deal.
  11. With 3 ppl in a small boat like that it could have been sitting very low in the water as well making it easy for a roller to come over the side. I guess you haven't seen this guy then?
  12. Welcome to Bass Resource Justin!
  13. Quite honestly I think it'd be a waste to have a combo that you only use to flip and pitch with in most situations from the bank. Since you don't fish a lot of heavy cover, there's really no need to get a different setup. If you need to flip or pitch you can do it with what you currently own.
  14. I've seen them with sores and whatnot, maybe a bump where there was a sore, but that's crazy! On a side note, love the guy using his spinning reel upside down! Classic!!
  15. Go for the 1000 size. It's plenty capable of handling a bass.
  16. An Avid or Avid X would be a great rod for soft plastics.
  17. They may have used the rubber "T" isolators instead of bolting it through, which over time may have broken down. They look like what's shown below.
  18. If it's the bracket I'm thinking, it's the very cheap and basic ones. It might have a little play to it. I'd make sure that it's tightened down securely to the boat. If I had to guess, that'd be where a bit of the noise is coming from.
  19. There are some costs, but they shouldn't be as much as this, unless you just totally disregard maintenance.
  20. Congrats on your first rig!
  21. I'm not sure how well low cost and auto mix, but BPS has one of their auto inflate vests on sale for $100 right now. Otherwise I've heard good things about the Mustang MIT auto vests although I haven't tried one on to know how comfortable they are. The Onyx vests get pretty good reviews as well.
  22. DVT hit the nail on the head.
  23. No doubt, we'll be doing that one once it warms up!
  24. 8 should be fine for something like that.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.