CFFF 1.5

Mitchum - unscented

That sticker is long gone.

No I don't. I assumed you just sent general installation instructions. But if it helps I have a Carolina Skiff J16 with a 30hp Tohatsu 4 Stroke.

I am getting one of these also. Wayne could you please forward me the pm also. Thanks.

The guy at the marine store told me to run them that way but it didn't work. I ran a ground from the lights to the trailer and then ran a ground from the trailer side connector to the trailer. Originally I ran a wire from each light to the ground on the trailer side connector but, the brake lights wouldn't work when the head lights were on, so I ran the ground from the lights to the trailer and it works perfectly now.

I guess you would be ticked at me when I launch. My headlights won't turn off, unless the truck is off.

This is what the guy at the marine store told me to do, but it didn't work. So I ran a ground wire from the trailer side plug to the trailer and then ran a ground from the lights to the trailer. Works perfectly now.

Yes. My friend has this same boat and I weigh 250 and he weighs 190 and we have no problems in this boat. Plus add tackle, cooler, trolling motor, and battery. We have never had any problems.

Yeah I'll make sure I torque them to the correct specs. I checked tractor supply tonight for tires and hubs, man are they expensive, they wanted almost $50 for 4.80-12 LRC tires and $51 for one hub. That is ridiculous. My wal-mart doesn't have any in stock but they only charge $30 for the same tire and will mount them for $5.

I saw this about a month ago and told my dad about it. He made it about 2 weeks ago and it was really good. He used venison sausage instead of the regular sausage. It was really good.

I just dropped the tires off at my mechanic and he said oh yeah they will come right off with the impact wrench...nope they wouldn't even budge, well one did but it was just spinning in the hub. He is going to cut the bolts off. I'll check craigslist and tractor supply. I'm starting to get really excited. As long as there are no other unforseen problems, the boat and trailer should be water ready this Friday. Need to replace the hubs and leaf springs and few other easy things and she will be ready to go.

I saw this in the theatres and I thought it was very good.

Broke - Hed Pe Self Titled - Hed Pe The New Release - Primer 55 In Utero - Nirvana Live 101 Proof - Pantera All Eyez on Me - Tupac 3 Dollar Bill Y'all - Limp Bizkit Self Titled - Slipknot Gift - Taproot Drawing Black Lines - Project 86 Sixteen Stone - Bush I could name a bunch more but these are some of my favorites.

I just got a new boat and I'm not going to name it until I use it a few times. After a few uses you will have a name for it that fits the boat. Kind of like naming a dog, at least for me anyway. You have to have it for a few weeks until you really know the right name for the dog.

Thanks man I appreciate it. I got the hub off with the wheel still attached, but at least it is a start. I am going to take the wheels to a mechanic tomorrow to see if I can get the lugs off or at least cut the bolts off so I can reuse the rims. Question: where is the best place to buy tires for the trailer.

Yeah I have absolutely no idea what I am doing. I have never done anything like but I am pretty handy and I feel this shouldn't be too hard.

I will try doing that tomorrow. I wasn't sure if that was possible. I plan on replaceing the whole unit.

I went and bought a 20" 4 way and I was able to turn the lugs but, because the hub is so rusted when I turn the nuts it is just turning the whole bolt I believe I didn't have anybody watching the hub side of the bolts. I really just want to get everything off so I can replace the hubs. I can't tow the boat anywhere because I can't get the boat registered until I get the title from the previous owner. Is there any way I can just get the whole thing off so I can replace the hubs and leaf springs.

The lug nuts on my trailer seem to be permanentely attached. I have tried multiple things to get the nuts off and I haven't been able to even budge the nut. I need to get them off so I can change the hubs. Things I have tried. 4 way 3/8" Socket wrench - Busted the Wrench Heated the nut with a propane torch and applied PB Blaster My breaker bar isn't big enough to fit over the 4 way but i'm going to try to find one that will fit over it. Do any of you have any other Ideas to help me get these nuts off. I can't take it anywhere until I get the title so I can get the boat registered.

I recently bought a boat that had an old bottom line tournament leader series fish finder that had the transducer cut off of it, and I can't find a replacement so I am shopping for a new Depth Finder. I am looking for a budget minded depth finder. I would like to spend less than $200. I currently have a Humminbird 535 Portable and like the features of that unit and I contemplated just buying a power cable transducer and mounting base for it but all the parts are going to cost me over $100 and right now on bps I can get the 525 for $119. Is there a better budget minded depth finder that I should look at. I have seen the Eagle Cuda's and the Garmin 140.

tried starting my motor for the first time today and on the second turn of the key....................................... success. She started right and idled pretty smooth. I am stoked.

Actually I remember malwarebytes having a pay version that actively monitors your computer for spyware/viruses while the free version you have to scan youself.

Wow that is weird. I have used this program in the past 6 months probably 10x to get rid of virus' on employee's computers at work as well as side work that I do and I have never had to pay anything to get it to remove the virus...maybe it is something new.

You aren't the only one. It must be a florida thing. I was taught early on that you always take off the front prop and tweak the back prop. I recently put both props on the back and have had a good amount of success that way. I have honestly never fished a horse with the front prop on. That is one of my go to baits when the bite is tough. My fishing parter and I say, one of us has to tie on a DH (baseball term).

Malwarebytes should have been free. Where did you go that you had to pay for the software?