Chris Catignani

Pretty unique. Love the OG wrap...

...still working on that airbrushing....

I have to admit...I smoked a lot of weed listing to that album.

Its a little ironic that Take Five is one of the more popular Dave Brubeck Quartet songs... Its a song written by Paul Desmond (sax) for Joe Morello (drums) to showcase his mastery of 5/4 time.

The drift paddle seems to help a little. I have two drift anchors I deploy on a really windy day..they seem to work better. You need to orient the boat with the paddles...not so much with the drift anchor.

^10 Sticking with the "Thunder" theme ...Finnish band playing bluegrass

It was in Marrowbone Creek on Cheatum.

I have had one fishing in the Cumberland...hit a flippin jig.

Amazing stories Tom...thanks for sharing.

yes...the guide foot will move...even after its wrapped on.

Since you do maintenace on your trailer yearly...I would bet that your issues are just water intrusion. There is such a "fix" thats called a Speedi Sleeve (SKF)...it a wafer-thin stainless steel sleave you drive over the damaged spindle surface.

#2 - The handle looks pretty good to me #4 - You may just need a little more pressure and or a few more wraps over the pull loop. #5 - I do this on all the rods...the hook keeper is positioned about 45 degrees left of bottom. If you turn you wrist just a bit ...the hook keeper is sticking out exposed (left). #6 - apply a thin coat...it should not blob. #7 - I will use the side of a flame from a BiC lighter to singe the ends down...then I will just pick off tiny bead with my finger nail. All in all...it looks fine.

^8...total rock stars.

I really like the NOCO line of products...I have the Genius 10amp 3 bank charger in the boat.

How can it produce any more volts than 12 volts?

Maybe just ask him what he wants to do? Then explain to him that the free ride is over. No phone, no clothes, no more. I know it sounds harsh...but the worst thing you can do is keep enabling him. Good luck with all this...I have been through it and would not wish this on my worst enemy.

No...Do this only if your melting them down to re-pour...sorry I wasnt really following you there.

Try a Crayon...or just start with a half.

It would well be within your right to ask the manufacturer for a "chain of custody" with taxes accounted for.

Yes...it does beep when you start up. 1 beep is normal system test. 4 beeps every two minutes is low oil in reservoir. 4 beeps every two minutes water in fuel filter is full. Continuous: Cooling system problem Continuous: Oil critically low Continuous: oil pump Continuous: RPM max The alarm horn is inside the remote control box.

I think it will be fine attached to the piece your holding... Instead of screw only ...use a screw and washer and nut...use lock tight on the thread. Also...does the piece your holding bolt down too? Hopefully yes.