Jump to content
Dat_Bass

Soft Plastic Making

Recommended Posts

Where is a good place to look if I want to buy soft plastic molds that closely resemble a 1) Zoom Speed Worm 2) Zoom Fluke 3) Just some stick bait and 4) A swimbait that resemble a Gambler or Reaction Innovations it something along those lines? What all would I need to buy and what would an estimate of price to start making baits?

  • Like 1

Share this post


Link to post
Share on other sites

Tackleunderground.com is the best site for the lure maker. They have everyone from newbies like you to guys who have huge set ups that do it for a living. 

 

Do-it molds has a ton of different molds including and exact copy of the Senko

 

I spent a lot of time on Tackle underground pondering the idea of making my own lures and the thought still comes and goes from time to time but from what I've read on there and he adds from some who do it is you're not really doing it to save money because it's not a cheap hobby. I can see what they mean, I've never don't it and I was already thinking "ok I need this, this, and this" and the list goes on and next thing you know you're up to your eyeballs in stuff you'll use once. That being said it does look fun and like I said earlier I stink think about doing it. 

 

Good luck with your venture.

  • Like 1

Share this post


Link to post
Share on other sites
7 hours ago, Dat_Bass said:

Where is a good place to look if I want to buy soft plastic molds that closely resemble a 1) Zoom Speed Worm 2) Zoom Fluke 3) Just some stick bait and 4) A swimbait that resemble a Gambler or Reaction Innovations it something along those lines? What all would I need to buy and what would an estimate of price to start making baits?

Making baits to save money I don't think is possible.  Maybe if u only fished one bait and never felt the need to try new things.  An estimate at what you mentioned I would guess ur gonna be around $350-$400 in the molds alone.  Another $125 for plastics because to buy it a gallon at a time is way more expensive then buying it by 5 gallon increments.  I.e. $60 gal for Lurecraft or $130 or 5 gal Lurecraft. The stuff don't go bad so to try and make it worth the investment and break even in the long run u will be better off just buying 5 gal.  Now u r at $630 and u don't have an injector coloring and glitter.  Injectors run around 60 Pyrex measuring cups 5 but you will need two so $10.  So now ur at 700 and still need colors and glitter stick to the basics for color u'll wind up with 5 or 6 colors around $5 each so 730.  Now glitter I would stick with basics again probably 6-8 colors with a few same colors in different sizes so call it 10 total glitters at 5 each now ur at 780.  Gonna need hot gloves $10 $790 big clamps $8 each need four one for each mold ur now at $825 a few storage containers some bags worm oil salt and scent u will be in the $900 ballpark. Now u have everything u need until the first time u use it and ur wife smells it and u are forced to buy a new microwave cause u don't want to eat out of the same one ur making worms in so now there is another $50-$100. Add in shipping prices and we can call it a nice even $1000 give or take.  But 6 colors don't cut it neither does 8 glitters and u also have highlights and pearls and ya lol so u wind up having this 

Sorry can't get pictures to load but ya u get point.  I just started 3 months ago and have probably 20 molds and 30 colors and highlights along with 20 or 30 glitters.  It's very addicting to say the least.  On a side note for personal use colors and glitters will last a long time just like the molds and once u have them you have them so it's a long term investment don't think they will pay for them selves short termbecause wat it cost plus ur time u could buy alot of baits.  I also found that the baits I do pour that I like I have multiple molds of just to speed up production on them.

Share this post


Link to post
Share on other sites

What if you just want to remold your old plastics instead of wasting them all the time?  I am just looking either for a senko mold or a big hammer tail swim bait.  

 

Is it worth it?  

Share this post


Link to post
Share on other sites
1 hour ago, dgkasper58 said:

What if you just want to remold your old plastics instead of wasting them all the time?  I am just looking either for a senko mold or a big hammer tail swim bait.  

 

Is it worth it?  

I know a guy that has all the jazz and will pour it for you! Also the recycling worms never works from what he says. 

Share this post


Link to post
Share on other sites
3 hours ago, dgkasper58 said:

What if you just want to remold your old plastics instead of wasting them all the time?  I am just looking either for a senko mold or a big hammer tail swim bait.  

 

Is it worth it?  

To buy a mold to try and recycle plastic you would have to have alot of junk baits. And still need everything I just said minus coloring and glitter u would still probably be in the 200-300 ball park and have to wait to have enough baits to do it probably a 30for 15 ratio and they would have to be single color baits and all match. U would have to make sure there clean. My honest opinion not worth the investment to try and recycle old baits.

Share this post


Link to post
Share on other sites
7 hours ago, dgkasper58 said:

What if you just want to remold your old plastics instead of wasting them all the time?  I am just looking either for a senko mold or a big hammer tail swim bait.  

 

Is it worth it?  

Yes it is if you like brown.  Unless you have a bunch of scrap in the same color you will have to mix colors to get good pours and mixing colors winds up with brown.

  • Like 1

Share this post


Link to post
Share on other sites

I have found some good deals on ebay. basstackle has great molds as well if you want to buy new. Dont get into it expecting to save money, you just wont. The good news is, aluminum molds hold value. So you can buy a mold and shoot a couple hundred baits and sell the mold for a little less than what you paid for it. good luck

Share this post


Link to post
Share on other sites

If you just want to remold old plastic, you will need heat stabilizer. You can get by without it, but you will have to keep a close eye on reheats. Unless you want something special, saving money is hard to do.

Share this post


Link to post
Share on other sites

Mods can delete link to video if it's not allowed, but I make my own molds for less than 20 bucks and re use my plastics.  I've saved so much money its ridiculous. 

https://www.youtube.com/watch?v=6Rx2FD2RBqM&t=15s

  • Like 2

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • fishing

    bass fishing

    fishing forum

    fishing rods

    fishing rods

    fishing rods


    fishing rods

    fishing reels

    bass fish

    fishing poles

    Truck Caps

    fishing reels
    fishing reels

    fishing

    bass fish

    fish for bass
    fish

×