Mr_Scrogg

I must have small hands, I can only throw one at a time.

10lb Big Game, 15lb Red Label, 20lb CXX. Will have another set up soon with 65lb braid

Ok, I got ya. Ill definately be keeping an eye on it since I snugged it down. Thanks for all the info and help. I now know the mechanics and what Im looking at.

I dont think so. I snugged up the hub nut to take the play out. Put the cotter pin back in, then backed the nut off a little. So its snug, but still spins well. No play. Im going to double check both pressures, then keep an eye on it. Dont really know what else to do other than a trailer/axle shop

Shut it slo n ez p. lol

How would I check for a bent axle on this trailer?

Should I swap sides on tires to put the better one on that side?

Split shot of a Zoom Utail worm. Pumpkinseed/Chartreuse. Tru-Turn hooks. Used as a kid, caught hundreds of fish for me. Reminds me of fishing with my Dad.

Stinger 170 with a 50 hp Merc Ive topped at 31mph GPS @ 5300RPM fully loaded, full tank, 2 people. Stock 12p tin prop.

I've noticed a bit of inner tire wear on one tire. I jacked up the trailer and noticed some play when rocking the wheel back and forth. Would this be the culprit of my tire wear? Would a bad wheel bearing be the cause of this? The other side has some nice even wear on the tire, no grease out of the back seal, and no play in the back and forth of the wheel. The previous owner did replace the hub in question. Its different than the other. And the extra hub he gave me is the same as the one Im questioning. I spun both wheels when jacked up. Both sounded the same. No gritty, no unsual sounds. Thoughts?

Supertuning reels arent always to increase casting distances. So the whole "Its worthless, you turn the brakes up to regain control" bit is invalid. You can also get better casting ability with lighter lures. More distance pitching, and a overall better feel. But supertuning shouldnt stop at bearings. Drag upgrades are equally important.

They got zebras too. Heck, they pull water from Redmond. Redmond has mussels. SMH.

Its been started, Peter. Should be on front page. Im bringing my own personal bleach water bottle. Try to impress the gate keepers.

Nice!

Meaning the fat lady singing

Could be a local guy that pours jigheads. We got a few here that pours and sells in the local mom and pops shop

I think it is. Last time I was out it had a great level. Not blown out, but full. The upended culvert pipe in the SW cove by the dam was still under water, but visible.

I send mine to either Delaware Valley Tackle (site sponsor) or JFrancho. Both do good work

Thats debatable Blue.

Buy a new husband.

Those the Stingers I sent you? If they are, they are 1/0, and #1

I recommend coming to tge lake via the South way. Shorter gravel road travel, and overall better condition of the gravel road.

I had a problem with my 50 2stroke. Cold start at the beginning of the day, and then after it sat a while. Turned out being bad gas. Drained the tank, added quality additives. Now she purrs and cranks first time after shes warm. But I make sure the motor is level, primer bulb is firm. If you trim up, all the gas can drain out of the carb bowl.

It's not that difficult coming from Wichita. Turnpike to exit 147, Then west till 99, North on 99. Through Eskridge, and it's on the left hand side of the road. about 2 hours from Wichita.

Thanks cbass. Im wearing all black today for mourning.